What are the key products of incineration process

Posted on 2025-05-012025-05-01 by medical-waste-incinerator

Items/Model

TS800

Picture

Principle

Animal Waste Incineration Treatment

Burn Rate

Average 300-450 kg/hour

Feed Capacity

Average 1200kg/feeding

Control Mode

Electric Control

Combustion Chamber

3000Liter

Internal Dimensions

300*100*100 cm

Secondary Chamber

***

Feed Mode

Manual/Forklift

Voltage

220V/380V

Power

5.0Kw

Oil Consumption (kg/hour)

***waste to Power plants cost

Gas Consumption (m3/hour)

Ave.22.8m3n/hr

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

***

Feed Door

200x100cm(Electric Opening)

Chimney

3Meter

Chimney Sort

Stainless Steel

1st.

Three Combustion Chambers(Optional)

3 Ranked for high risk waste

Pet Cremation Equipment

For Pet(small/big) Cremation Business

Animal Incineration Equipment

For additional creature incineration

what would be the main products of incineration process

Maximum load of the camera (kg)

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

1200

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

1200kgs	Overall dimensions (without burner), (mm)
2823x1970x1724	500x220x190cm(without chimney)
2823x1970x1724 room Volume, m3	2.5 m3
300100100 cm, 3.0m3	EXT.main camera size
(d)2392x (b)1140	???
Size of loading opening, (mm)	(W)1152x (l)1425

W.1000*L.2000mm

Combustion temperature (C0)	650° – 1100°	800℃–1200℃
Weight (kg)	4500	7000kg
Weight of residues after combustion (kg)	no more than 5 percent	no more than 5 percent
Opening the hatch using a winch	accessibility	power-driven
The method of loading	the vertical	Top Feeding Door
Burners	Gas burners	Gas burners
Fire-resistant gasket,why is medical waste an issue	Z-blok fire-resistant gasket	Fire Brick and Refractory castable
Pipe dimensions (diameter, length) (mm)	1420×3000	???
Benefits of fire-resistant gaskets	Yes	yes
Temperature properties of the gasket (C0)	1650°	1700°C
Lining layer (fireclay brick)(mm)	114	114mm
Temperature properties of the liner (C0)	1650°	1700°C
burner gas (m3 / h)	9.9-17 m3 / h	22.8m3n/h max.
Burn rate (kg / h)	300-450	300-450
Electricity (volts/Hz)	220/50 Hz	220/50 Hz
Auto-ignition	Auto-ignition Yes	Auto-ignitio
Temperature sensor	accessibility	accessibility
Automatic control panel	the presence of	yes
Burn time at full load (hour)	4-8h	yes
Compliance of MPV and MPC emissions	contrasts to	China Standard
Painting	heat-resistant enamel	yes
	Items/Model	TS100(PLC)
TS150(PLC)	TS300(PLC)	TS500(PLC)
Burn Rate (Typical )	100 kg/hour	150 kg/hour
300 kg/hour	500 kg/hour	Control Mode
PLC Auto.	PLC Auto.	PLC Auto.

PLC Auto.

Combustion Chamber	1200L	1500L	2000L	3000L
Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm
Secondary Chamber	600L	750L	1000L	1500L
Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Feed Mode	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V
Electricity	1.38Kw	1.69Kw	2.57Kw	4.88Kw
Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33	Ave.44
Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6	Ave.52.8
Infection Monitor	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes
Oil Tank	200L	300L	500L	500L
Chimney	10Meter	10Meter	14Meter	14Meter
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	6000kg	8500kg	11000kg	16000kg
External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm
				2021-02-23
Gross Weight	6000kg	8500kg	11000kg	16000kg
External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm

A heat exchanger to pre-heat air destined for the primary chamber is not compulsory but recommended.

The combustion air systems and fans shall be designed to ensure high combustion efficiency and avoid a reducing (corrosive) atmosphere, incomplete burnout of the flue gases and related problems. It should also be possible to heat the primary air from 10°C to approximately 145°C, depending on the waste composition and moisture content.

“The incinerator shall be designed and equipped to be installed, commissioned and operated in such a way as to prevent emissions into the air giving rise to significant ground-level air pollution; in particular, exhaust gases shall be discharged in a controlled fashion by means of a stack the height of which is calculated in such a way as to safeguard human health and the environment.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-23

Garbage Incinerator TS150 PLC Mobile Type

Posted on 2025-04-252025-04-25 by medical-waste-incinerator

	Items/Model
HICLOVER TS150(PLC) (Mobile Sort ) N1155	Picture
mobile incinerator	Principle
Waste Incineration Remedy,trash incinerator	Burn Rate
Average 150 kg/hour	Feed Capacity
Average 150kg/feeding	Control Mode
PLC(Programmable Logic Controller Incinerator)	Combustion Chamber
1200L	Internal Dimensions
120x100x100cm	Secondary Chamber
600L	Smoke Filter Chamber
Yes(Dry Scrubber)	Feed Mode
Manual	Voltage
220V	Electricity
0.9Kw	Oil Infection (kg/hour)
average 20.4	Gas Consumption (m3/hour)
average 24.5	Infection Monitor
Digital Display	Temperature Protection
Yes	Oil Tank
200L	Feed Door
80x60cm	Chimney
5Meter	Chimney Sort
Stainless Steel	1st.
	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)

3 Chambers for high risk waste

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Pet Cremation Equipment

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

For Pet(small/big) Cremation Business	Animal Incineration Equipment
For other animal incineration
Items/Model	TS100(PLC)
TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Rate (Average)
100 kg/hour	150 kg/hour

300 kg/hour

500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
PLC Auto.	Combustion Chamber	1200L	1500L	2000L
3000L	Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm
210x120x120cm	Secondary Chamber	600L	750L	1000L
1500L	Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Dry Scrubber	Feed Mode	Manual	Manual	Manual
Manual	Voltage	220V	220V	220V
220V	Electricity	1.38Kw	1.69Kw	2.57Kw
4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33
Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6
Ave.52.8	Infection Monitor	Yes	Yes	Yes
Yes	Temperature Protection	Yes	Yes	Yes
Yes	Oil Tank	200L	300L	500L
500L	Chimney	10Meter	10Meter	14Meter
14Meter	Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel
Stainless Steel	1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃
800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
1000℃-1200℃	Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.
2.0 Sec.	Gross Weight	6000kg	8500kg	11000kg
16000kg	External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm
450x210x300cm
2021-02-28	1000℃-1200℃	Residency Time	2.0 Sec.	450x210x300cm

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-28

Steps of waste management

Posted on 2025-03-172025-03-17 by medical-waste-incinerator

	Item
Specification	Model
A1500	Internal Dimensions
150 x 100 x 96cm	Suit for Animal	Cat – yes	Dog – yes	Pig – yes
Cow – Little	Main Product List
Main Combustion Chamber
Secondary Combustion Chamber
Mix-Combustion Chamber
Wet Scrubber( Washing Tower)
Incinerator Control Case
Chimney:10.0Meters *(Update to Stainless Steel, free Price )
Italy oil burner: 03 sets

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Oil Tank: 500Liters

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Chambers for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

For other animal incineration

hospital waste management ppt 2018

	Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
PLC Auto.	Combustion Chamber	1200L	1500L	2000L
3000L	Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm
210x120x120cm	Secondary Chamber	600L	750L	1000L
1500L	Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Dry Scrubber	Feed Mode	Manual	Manual	Manual
Manual	Voltage	220V	220V	220V
220V	Power	1.38Kw	1.69Kw	2.57Kw
4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33
Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6
Ave.52.8	Temperature Monitor	Yes	Yes	Yes
Yes	Temperature Protection	Yes	Yes	Yes
Yes	Oil Tank	200L	300L	500L
500L	Chimney	10Meter	10Meter	14Meter
14Meter	Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel
Stainless Steel	1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃
800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
1000℃-1200℃	Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.
2.0 Sec.	Gross Weight	6000kg	8500kg	11000kg
16000kg	External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm

brick incinerator design,The control system shall include an electronic performance monitoring and logging system. The system shall be capable of monitoring and logging chamber temperatures at regular intervals (not less than once per minute, with the capacity to vary the logging frequency). The system shall include the capacity to download the performance data by USB connection.

All the measuring devices attached with the incinerator should have digital display and should have provision of connecting to the recording system, which should include fuel meter and separate energy meter.

The temperature shall be determined against the inside wall of the combustion chambers. An audible and visible alarm shall be installed to warn the operator when the secondary temperature drops to below the required temperature.

The primary chamber must meet or exceed the following criteria:

“• Heavy steel construction.

• Fixed hearth geometry and starved air gasification operational mode.

• Hot face refractory concrete-ceramic suitable for thermal shock up to 1400 Celsius and abrasion. Minimum thickness 150mm.

• Cold face refractory lining of calcium silicate or superior material, minimum thickness 100mm.

• Refractory lining of all the ducts shall be done with refractory castings. Superior quality ceramic wool shall be used at all hot duct flanges and expansion joints.

• Multiple electric ignition fuel burners designed to use automotive diesel fuel.

• Flame of the primary burner shall be oriented towards the center of the unit which does not impinge directly on the refractory floor or wall. The secondary burner shall be positioned in such a way that the flue gas passes through the flame.

• The unit shall prevent leakage of the hot flue gas and any backfire.

• An electrically powered fan forced air supply, with the capacity for variation by the operator.

• Digital thermometers connected to electronic dataloggers. The thermometers shall be located on the chamber walls away from the fuel burner.

• A differential air pressure gauge connected to an electronic datalogger

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

450x210x300cm

Inciner

Posted on 2025-02-282025-02-28 by medical-waste-incinerator

Basic Info.

Export Markets:Global

Additional Info.

Trademark:nanjing clover

Origin:Nanjing Clover

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to oil incinerators, oil sludge burner, oil sludge mobile incinerator, oily sludge incineration combustion, onsite remote medical waste system, 6ton per day. Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.

Incinerator is a incineration equipment, direct fire waste by gas fuel or oi fuel. As different circumscription, incinerator can be named many words as below:

Treatment capacity: Small scale incinerator, large scale incinerator and incineration pant.

Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators

Incinerator fuel: Gas incinerator, oil incinerator

Waste to Energy (WTE): WTE incinerator, non-WTE incinerator

Incinerator Manufacturer: China incinerator manufacturer, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer.

Famous Incinerator manufacturer company: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India)

Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour

incinerator manufacturer china

Posted on 2025-02-262025-02-26 by medical-waste-incinerator

We are china incinerator manufacturer, contractor and exporter. Manufacturers create reasonable price for incinerator consumer, provide medical incinerator, hospital incinerator, creature incinerators, hog incinerators, pet cremation gear, little incinerator, pet incinerator, animal incinerator, mobile incinerator, little animal incinerator, infectious waste pyrolysis machine, lab incinerator. HICLOVER help customer decrease purchase budget, custom made function, quality products and friendly service.

Treatment and disposal technologies for health care waste

Posted on 2025-01-122025-01-12 by medical-waste-incinerator

Items/Model

TS75

Picture

Principle

Solid Waste Incineration

Burn Rate

Average 75 kg/hour

Feed Capacity

Average 100kg

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

600L

Internal Dimensions

100x60x100cm

Secondary Chamber

300L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

3.0Kw

Oil Consumption (L/Hour)

15-20

Natural Gas Consumption (m3n/hour)

**

Temperature Monitor

Digital Screen

Temperature Protection

Yes

Oil Tank

250L

Feed Door

Dia.55cm

Chimney

6 Meters

Chimney Sort

Stainless Steel

1st.

800℃–1000℃

2nd.

Gross Weight

2500kg

External Dimensions

2080x1100x3840cm(without chimney)

HICLOVER Incinerator/Parts Range

Main Feature

Medical Waste Incinerators	HICLOVER 10-500kgs/Hr.Double Combustion Chambers
Single Combustion Chamber	Small, Cheap,10-20kgs/Hr.
Three Combustion Chambers(Optional)	3 Ranked for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For additional creature incineration
	Items/Model

The forecasted feedstock loads, and daily loading rates are generally summarized as:

• Mixed general, clinical and incinerable hazardous wastes with a wide range of calorific values and densities. The wastes will consist of 100% biomedical wastes.

• Wastes either small enough to fit within a 60 litre waste sack or broken up or shredded to less than 300mm in size.

• Operation on a daytime shift basis, 5 days per week.

TS100(PLC)

TS150(PLC)	TS300(PLC)	TS500(PLC)	Burn Rate (Typical )	100 kg/hour
150 kg/hour	300 kg/hour	500 kg/hour	Control Mode	PLC Auto.
PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber	1200L
1500L	2000L	3000L	Internal Dimensions	120x100x100cm
150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber	600L
750L	1000L	1500L	Smoke Filter Chamber	Dry Scrubber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode	Manual
Manual	Manual	Manual	Voltage	220V
220V	220V	220V	Power	1.38Kw
1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4
Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5
Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor	Yes
Yes	Yes	Yes	Temperature Protection	Yes
Yes	Yes	Yes	Oil Tank	200L
300L	500L	500L	Chimney	10Meter
10Meter	14Meter	14Meter	Chimney Type	Stainless Steel
Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature	800℃–1000℃
800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time	2.0 Sec.
2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight	6000kg
8500kg	11000kg	16000kg	External Dimensions	260x150x180cm
300x160x190cm	400x210x300cm	450x210x300cm

The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers.

“Warranty will be as per the UNOPS ‘contracts for the provision of goods’ under section 4.5 of the ‘general conditions of contract’ 4.5 WARRANTIES: Unless otherwise specified in the Contract, in addition to and without limiting any other warranties, remedies or rights of UNOPS stated in or arising under the Contract, the Contractor warrants and represents that:

4.5.1 The goods, including all packaging and packing thereof, conform to the specifications of the Contract, are fit for the purposes for which such goods are ordinarily used and for any purposes expressly made known in writing in the Contract, and shall be of even quality, free from faults and defects in design, material, manufacturer and workmanship;

4.5.2 If the Contractor is not the original manufacturer of the goods, the Contractor shall provide UNOPS with the benefit of all manufacturers’ warranties in addition to any other warranties required to be provided under the Contract;

4.5.3 The goods are of the quality, quantity and description required by the Contract, including when subjected to conditions prevailing in the place of final destination;

The goods are free from any right of claim by any third-party, including claims of infringement of any 4.5.4intellectual property rights, including, but not limited to, patents, copyright and trade secrets;

4.5.5 The goods are new and unused;

4.5.6 All warranties will remain fully valid following any delivery of the goods and for a period of not less than one (1) year following acceptance of the goods by UNOPS in accordance with the Contract;

4.5.7 During any period in which the Contractor’s warranties are effective, upon notice by UNOPS that the goods do not conform to the requirements of the Contract, the Contractor shall promptly and at its own expense correct such non-conformities or, in case of its inability to do so, replace the defective goods with goods of the same or better quality or, at its own cost, remove the defective goods and fully reimburse UNOPS for the purchase price paid for the defective goods; and,

4.5.8 The Contractor shall remain responsive to the needs of UNOPS for any services that may be required in connection with any of the Contractor’s warranties under the Contract.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-21

Waste Incineration Treatment Model TS1000 1000kgs per hour Shirt Feeding

Posted on 2024-12-222024-12-22 by medical-waste-incinerator

Items/Model

TS1000

Picture

Principle

Waste Incineration Treatment

Burn Rate

Average 1000 kg/hour

Feed Capacity

Average 3000kg/feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

4800Liter

Internal Dimensions

400*120*100 cm

Secondary Chamber

1000Liter

Feed Mode

Manual/Forklift

Voltage

220V/380V

Electricity

5.0Kw

Oil Infection (kg/hour)

Average 67(DO)

Gas Consumption (m3/hour)

***

Temperature Monitor

Digital Screen

Temperature Protection

Yes

Oil Tank

800Liter

Feed Door

300x120cm(Electric Opening)

Chimney

6Meter

Chimney Type

Stainless Steel

1st.

800℃–1000℃

2nd. Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Gross Weight

18000kg

External Dimensions

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

700x220x320cm(without chimney)

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Ranked for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

For other animal incineration

	Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Speed (Typical )	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
PLC Auto.	Combustion Chamber	1200L	1500L	2000L
3000L	Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm
210x120x120cm	Secondary Chamber	600L	750L	1000L
1500L	Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Dry Scrubber	Feed Mode	Manual	Manual	Manual
Manual	Voltage	220V	220V	220V
220V	Electricity	1.38Kw	1.69Kw	2.57Kw
4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33
Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6
Ave.52.8	Temperature Monitor	Yes	Yes	Yes
Yes	Temperature Protection	Yes	Yes	Yes
Yes	Oil Tank	200L	300L	500L
500L	Chimney	10Meter	10Meter	14Meter
14Meter	Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel
Stainless Steel	1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃
800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
1000℃-1200℃	Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.
2.0 Sec.	Gross Weight	6000kg	8500kg	11000kg
16000kg	External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

450x210x300cm

www.public-domain-image.com (public domain image)

HS Code for waste incinerator 84178050

Posted on 2024-12-192024-12-19 by medical-waste-incinerator

HS Code for waste incinerator 84178050

	Item
Specification	Model
TS100 PLC	Main Product List per 01 set
Main Combustion Chamber
Secondary Combustion Chamber
Smoke Filter Chamber
Incinerator PLC Control Case	Chimney:10.0Meters
*(upgrade to Stainless Steel, free cost)
Italy oil/gas burner: 02 units
Oil Tank (if Petroleum fuel): 200Liters