首页 » clover incinerator

Garbage Incinerator TS150 PLC Mobile Type

Posted on 2021-09-012021-09-01 by medical-waste-incinerator

	Items/Model
HICLOVER TS150(PLC) (Mobile Sort ) N1155	Picture
mobile incinerator	Principle
Waste Incineration Remedy,trash incinerator	Burn Rate
Average 150 kg/hour	Feed Capacity
Average 150kg/feeding	Control Mode
PLC(Programmable Logic Controller Incinerator)	Combustion Chamber
1200L	Internal Dimensions
120x100x100cm	Secondary Chamber
600L	Smoke Filter Chamber
Yes(Dry Scrubber)	Feed Mode
Manual	Voltage
220V	Electricity
0.9Kw	Oil Infection (kg/hour)
average 20.4	Gas Consumption (m3/hour)
average 24.5	Infection Monitor
Digital Display	Temperature Protection
Yes	Oil Tank
200L	Feed Door
80x60cm	Chimney
5Meter	Chimney Sort
Stainless Steel	1st.
	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)

3 Chambers for high risk waste

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Pet Cremation Equipment

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

For Pet(small/big) Cremation Business	Animal Incineration Equipment
For other animal incineration
Items/Model	TS100(PLC)
TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Rate (Average)
100 kg/hour	150 kg/hour

300 kg/hour

500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
PLC Auto.	Combustion Chamber	1200L	1500L	2000L
3000L	Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm
210x120x120cm	Secondary Chamber	600L	750L	1000L
1500L	Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Dry Scrubber	Feed Mode	Manual	Manual	Manual
Manual	Voltage	220V	220V	220V
220V	Electricity	1.38Kw	1.69Kw	2.57Kw
4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33
Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6
Ave.52.8	Infection Monitor	Yes	Yes	Yes
Yes	Temperature Protection	Yes	Yes	Yes
Yes	Oil Tank	200L	300L	500L
500L	Chimney	10Meter	10Meter	14Meter
14Meter	Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel
Stainless Steel	1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃
800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
1000℃-1200℃	Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.
2.0 Sec.	Gross Weight	6000kg	8500kg	11000kg
16000kg	External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm
450x210x300cm
2021-02-28	1000℃-1200℃	Residency Time	2.0 Sec.	450x210x300cm

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-28

Incinerator for Waste Management Facility and Spare Parts

Posted on 2021-08-292021-08-29 by medical-waste-incinerator

Items/Model

TS500(PLC)

Picture

Principle

Waste Incineration Treatment

Burn Rate

Average 500 kg/hour

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

2700Liters (2.7m3)

Internal Dimensions

190x120x120cm

Secondary Chamber

1300Liters (1.3m3)

Smoke Filter Chamber

Dry Scrubber Chamber

Feed Mode

Manual

Voltage

220V

Electricity

3.0Kw

Oil Consumption (kg/hour)

Typical 44(DO)

Gas Consumption (m3n/hour)

Typical 53(NG)

Infection Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

400L

Feed Door

90x80cm

Chimney

10Meter

Chimney Type

Stainless Steel

1st.

Gross Weight

15000kg

External Dimensions

400x210x300cm(without chimney)

HICLOVER Incinerator/Parts Range

Main Feature

Medical Waste Incinerators

Phone: +86-13813931455(whatsapp/wechat)

Website: http://www.hiclover.com/

HICLOVER 10-500kgs/Hr.Double Combustion Chambers

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

Supply. Delivery. Insta llation, Commissioning a nd Maintenance of Industria l Standard Solid Waste lncinerator.CONTRACTOR shall be responsible to supply on-the – shelf industrial solid wast e incinerator and its accessories in the market and/or fabr icate its auxiliary related equipment for comprehensive functionalities. Capac ity 500 kg/ hour {dual chamber inc ineration) electricity from garbage

1.Primary Chamber – Destruction of Mater ial (>850°C) .

2.Secondary Hazar dous carcinogenic destroyed).

Chamber – Destruction of Gas (>1200°C to ensure induced gases is fully Waste type Compatibility

General Wastes/Industrial Wastes/Bur nable

Wastes/Medic al Wastes/Oily

Sludge/ Contaminated Soil/ Saw Dust.

Fuel type Dual Type (Diesel and Gas)

Secondary Chamber &

A ir Pollution Control (APCS) Capabilities

System Compa ny declaration that the equipment is capa ble to remove VOC’s. CO, No×，Dio×ins

& Furans (through high temperature f iltration), particulate matter. Heavy Metals (Pb, As, Sb, Cd，丁I) – Result from an accredited lab.

2.Blac k smoke control technology : Dry scrubber, longer residence time in secondar y c ha mber (to ensure complete combustion, kill virus) .

Single Combustion Chamber	Small, Cheap,10-20kgs/Hr.
Three Combustion Chambers(Optional)	3 Chambers for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For other animal incineration
incinerator design for colleges
Items/Model	TS100(PLC)

TS150(PLC)

TS300(PLC)

TS500(PLC)	Burn Rate (Typical )	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
PLC Auto.	Combustion Chamber	1200L	1500L	2000L
3000L	Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm
210x120x120cm	Secondary Chamber	600L	750L	1000L
1500L	Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Dry Scrubber	Feed Mode	Manual	Manual	Manual
Manual	Voltage	220V	220V	220V
220V	Electricity	1.38Kw	1.69Kw	2.57Kw
4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33
Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6
Ave.52.8	Infection Monitor	Yes	Yes	Yes
Yes	Temperature Protection	Yes	Yes	Yes
Yes	Oil Tank	200L	300L	500L
500L	Chimney	10Meter	10Meter	14Meter
14Meter	Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel
Stainless Steel	1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃
800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
1000℃-1200℃	Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.
2.0 Sec.	Gross Weight	6000kg	8500kg	11000kg
16000kg	External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm
450x210x300cm

microwave irradiation of biomedical waste

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-23

Guidelines on waste management Incinerator Model YD-20C

Posted on 2021-08-282021-08-28 by medical-waste-incinerator

	Item
Specification	Model
YD-20C	Main Product List
		Main Combustion Chamber
		Secondary Combustion Chamber
		Mix-Combustion Chamber
		Smoke Filter Chamber
		Incinerator Control Case
		Chimney:5.0Meters *(Update to Stainless Steel, free cost)
		Italy Petroleum burner: 02 sets
	Oil Tank: 100Liters	Optional:

Mobile Trailer for Incinerator

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Mobile Type Incinerator

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Chambers for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

For other animal incineration

	Items/Model
YD-20C	Burning Rate (kgs/Hour)
Average 20 kgs/hour	Feed Capacity (kgs)
Average 40 kgs/feeding	Gear Weight
2100 kgs	Main Chamber (Liters)
200	Secondary Chamber (Liters)
140	External Dimensions (cm)
170x140x160	Internal Dimensions (cm)
55x55x65	Oil Tank(Liters)
100	Door Opening (cm)
38 x 48	Chimney (M)
5.0	Chimney Type
Stainless Steel	Secondary Chamber
YES	Mix-Combustion Chamber
YES	Smoke Filter Chamber
YES	Combustion Fuel
Oil/Gas	Residency Time
2.0 Sec. Chamber Temperature	800℃–1000℃
2nd. Chamber Temperature	1000℃-1200℃
	Items/Model

TS100(PLC)

TS150(PLC)	TS300(PLC)	TS500(PLC)	Burn Speed (Average)	100 kg/hour
150 kg/hour	300 kg/hour	500 kg/hour	Control Mode	PLC Auto.
PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber	1200L
1500L	2000L	3000L	Internal Dimensions	120x100x100cm
150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber	600L
750L	1000L	1500L	Smoke Filter Chamber	Dry Scrubber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode	Manual
Manual	Manual	Manual	Voltage	220V
220V	220V	220V	Power	1.38Kw
1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4
Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5
Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor	Yes
Yes	Yes	Yes	Temperature Protection	Yes
Yes	Yes	Yes	Oil Tank	200L
300L	500L	500L	Chimney	10Meter
10Meter	14Meter	14Meter	Chimney Type	Stainless Steel
Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature	800℃–1000℃
800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time	2.0 Sec.
2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight	6000kg
8500kg	11000kg	16000kg	External Dimensions	260x150x180cm
300x160x190cm	400x210x300cm	450x210x300cm

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-23

Steps of waste management

Posted on 2021-08-252021-08-25 by medical-waste-incinerator

	Item
Specification	Model
A1500	Internal Dimensions
150 x 100 x 96cm	Suit for Animal	Cat – yes	Dog – yes	Pig – yes
Cow – Little	Main Product List
Main Combustion Chamber
Secondary Combustion Chamber
Mix-Combustion Chamber
Wet Scrubber( Washing Tower)
Incinerator Control Case
Chimney:10.0Meters *(Update to Stainless Steel, free Price )
Italy oil burner: 03 sets

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Oil Tank: 500Liters

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Chambers for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

For other animal incineration

hospital waste management ppt 2018

	Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
PLC Auto.	Combustion Chamber	1200L	1500L	2000L
3000L	Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm
210x120x120cm	Secondary Chamber	600L	750L	1000L
1500L	Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Dry Scrubber	Feed Mode	Manual	Manual	Manual
Manual	Voltage	220V	220V	220V
220V	Power	1.38Kw	1.69Kw	2.57Kw
4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33
Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6
Ave.52.8	Temperature Monitor	Yes	Yes	Yes
Yes	Temperature Protection	Yes	Yes	Yes
Yes	Oil Tank	200L	300L	500L
500L	Chimney	10Meter	10Meter	14Meter
14Meter	Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel
Stainless Steel	1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃
800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
1000℃-1200℃	Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.
2.0 Sec.	Gross Weight	6000kg	8500kg	11000kg
16000kg	External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm

brick incinerator design,The control system shall include an electronic performance monitoring and logging system. The system shall be capable of monitoring and logging chamber temperatures at regular intervals (not less than once per minute, with the capacity to vary the logging frequency). The system shall include the capacity to download the performance data by USB connection.

All the measuring devices attached with the incinerator should have digital display and should have provision of connecting to the recording system, which should include fuel meter and separate energy meter.

The temperature shall be determined against the inside wall of the combustion chambers. An audible and visible alarm shall be installed to warn the operator when the secondary temperature drops to below the required temperature.

The primary chamber must meet or exceed the following criteria:

“• Heavy steel construction.

• Fixed hearth geometry and starved air gasification operational mode.

• Hot face refractory concrete-ceramic suitable for thermal shock up to 1400 Celsius and abrasion. Minimum thickness 150mm.

• Cold face refractory lining of calcium silicate or superior material, minimum thickness 100mm.

• Refractory lining of all the ducts shall be done with refractory castings. Superior quality ceramic wool shall be used at all hot duct flanges and expansion joints.

• Multiple electric ignition fuel burners designed to use automotive diesel fuel.

• Flame of the primary burner shall be oriented towards the center of the unit which does not impinge directly on the refractory floor or wall. The secondary burner shall be positioned in such a way that the flue gas passes through the flame.

• The unit shall prevent leakage of the hot flue gas and any backfire.

• An electrically powered fan forced air supply, with the capacity for variation by the operator.

• Digital thermometers connected to electronic dataloggers. The thermometers shall be located on the chamber walls away from the fuel burner.

• A differential air pressure gauge connected to an electronic datalogger

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

450x210x300cm

What is medical waste management

Posted on 2021-08-242021-08-24 by medical-waste-incinerator

	Item
Specification	Model
YD-20C	Main Product List
		Primary Combustion Chamber
		Secondary Combustion Chamber
		Mix-Combustion Chamber
		Smoke Filter Chamber
		Incinerator Control Case
		Chimney:5.0Meters *(upgrade to Stainless Steel, free Price )
		Italy oil burner: 02 sets
	Oil Tank: 100Liters	Optional:

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Mobile Trailer for Incinerator

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

bio medical waste management ppt 2020

	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Chambers for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

The secondary chamber must comply with the following minimum criteria:

“• Heavy steel construction

• An excess air and high temperature operational mode.

• Sufficient size and appropriate geometry to achieve a gas temperature of at least 1000 Celsius for a retention time of at least 2 seconds when pre-heated and correctly operated.

• Sufficient forced air inflow and airflow and fuel supply controls to ensure an exhaust gas oxygen content range of 6-12% at all times.

• Hot face refractory concrete-ceramic suitable for thermal shock up to 1400 Celsius and abrasion. Minimum thickness 150mm.

• Cold face refractory lining of calcium silicate or superior material, minimum thickness 100mm.

• Refractory lining of all the ducts shall be done with refractory castings. Superior quality ceramic wool shall be used at all hot duct flanges and expansion joints

• An electrically powered fan forced air supply, with the capacity for variation by the operator.

• One or more fuel burners designed to use diesel fuel type 2 (vehicle standard) equipped with a spark igniter.

• A digital thermometer with connected to an electronic datalogger. The thermometer shall be located on the chamber wall away from the fuel burner.

For other animal incineration

	Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Speed (Typical )	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	Combustion Chamber
1200L	1500L	2000L	3000L	Internal Dimensions
120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber
600L	750L	1000L	1500L	Smoke Filter Chamber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode
Manual	Manual	Manual	Manual	Voltage
220V	220V	220V	220V	Power
1.38Kw	1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)
Ave.20.4	Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)
Ave.24.5	Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor
Yes	Yes	Yes	Yes	Temperature Protection
Yes	Yes	Yes	Yes	Oil Tank
200L	300L	500L	500L	Chimney
10Meter	10Meter	14Meter	14Meter	Chimney Type
Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature
800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time
2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight
6000kg	8500kg	11000kg	16000kg	External Dimensions
260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-21

Effect of biomedical waste on human health

Posted on 2021-08-232021-08-23 by medical-waste-incinerator

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.


Equipment Technical Specifications	Model
TS30S	Picture
	Feed Capacity
78 Liters for Main chamber	Burning Rate
Typical 30 kgs Each hour	Burning Time Each Feed
0.5 hour	Voltage
220V	Power
0.5Kw	Gas
Diesel oil	Burner
Diesel Oil Burner, 2 sets	Feed Mode
Manual	Fuel consumption (Oil)
Typical 8 Kgs/Hour	External Dimensions
90 x 90 x 150cm (main body)	Internal Dimensions
Dia.50 x 40cm(Primary Chamber)	Waste combustion chamber
78Liters	Article Combustion Chamber
50Liters	Oil Tank Capacity
100 Liters	Door Opening
25 x 25cm	Chimney
3.0M	Gross Weight
1200kgs	Chamber Material
Refractory Concrete	Max.
80,000Kcal/Hr.
Operation Technical Specifications	Chamber fever
8000C -10000C	Chamber Anti-Rate
13500C	Residency time
0.5 Sec.	Burning efficiency
＞98 percent	Waste Lower Calorific Power

ways of disposing solid waste

3000Kcal	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Ranked for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

For additional animal incineration

consequence of biomedical waste on human health

	Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Speed (Average)	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
Combustion Chamber	1200L	1500L	2000L	3000L
Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm
Secondary Chamber	600L	750L	1000L	1500L
Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Feed Mode	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V
Power	1.38Kw	1.69Kw	2.57Kw	4.88Kw
Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33	Ave.44
Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6	Ave.52.8
Infection Monitor	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes
Oil Tank	200L	300L	500L	500L
Chimney	10Meter	10Meter	14Meter	14Meter
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	6000kg	8500kg	11000kg	16000kg
External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm

The incinerator units shall include a temperature based electronic combustion control system that utilizes temperature and other data to inform automated or programmed cycling through the standard burn cycle: pre-heat, burn with waste addition, burn completion, cool-down. The system shall be capable of varying auxiliary fuel and air supply in both combustion chambers to achieve optimum combustion conditions. As far as practicable, the incinerator shall be of a plug and play type for ease of installation and commissioning in remote locations.

“The control system shall have a separate push button-based work station, which shall be located adjacent to the loading bay and protected from weather and impact damage. The system shall allow for rapid and straightforward intervention by the operator if the automatic system is not achieving the desired results during a burn cycle.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room2021-02-21

Treatment and disposal technologies for health care waste

Posted on 2021-08-222021-08-22 by medical-waste-incinerator

Items/Model

TS75

Picture

Principle

Solid Waste Incineration

Burn Rate

Average 75 kg/hour

Feed Capacity

Average 100kg

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

600L

Internal Dimensions

100x60x100cm

Secondary Chamber

300L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

3.0Kw

Oil Consumption (L/Hour)

15-20

Natural Gas Consumption (m3n/hour)

**

Temperature Monitor

Digital Screen

Temperature Protection

Yes

Oil Tank

250L

Feed Door

Dia.55cm

Chimney

6 Meters

Chimney Sort

Stainless Steel

1st.

800℃–1000℃

2nd.

Gross Weight

2500kg

External Dimensions

2080x1100x3840cm(without chimney)

HICLOVER Incinerator/Parts Range

Main Feature

Medical Waste Incinerators	HICLOVER 10-500kgs/Hr.Double Combustion Chambers
Single Combustion Chamber	Small, Cheap,10-20kgs/Hr.
Three Combustion Chambers(Optional)	3 Ranked for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For additional creature incineration
	Items/Model

The forecasted feedstock loads, and daily loading rates are generally summarized as:

• Mixed general, clinical and incinerable hazardous wastes with a wide range of calorific values and densities. The wastes will consist of 100% biomedical wastes.

• Wastes either small enough to fit within a 60 litre waste sack or broken up or shredded to less than 300mm in size.

• Operation on a daytime shift basis, 5 days per week.

TS100(PLC)

TS150(PLC)	TS300(PLC)	TS500(PLC)	Burn Rate (Typical )	100 kg/hour
150 kg/hour	300 kg/hour	500 kg/hour	Control Mode	PLC Auto.
PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber	1200L
1500L	2000L	3000L	Internal Dimensions	120x100x100cm
150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber	600L
750L	1000L	1500L	Smoke Filter Chamber	Dry Scrubber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode	Manual
Manual	Manual	Manual	Voltage	220V
220V	220V	220V	Power	1.38Kw
1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4
Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5
Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor	Yes
Yes	Yes	Yes	Temperature Protection	Yes
Yes	Yes	Yes	Oil Tank	200L
300L	500L	500L	Chimney	10Meter
10Meter	14Meter	14Meter	Chimney Type	Stainless Steel
Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature	800℃–1000℃
800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time	2.0 Sec.
2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight	6000kg
8500kg	11000kg	16000kg	External Dimensions	260x150x180cm
300x160x190cm	400x210x300cm	450x210x300cm

The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers.

“Warranty will be as per the UNOPS ‘contracts for the provision of goods’ under section 4.5 of the ‘general conditions of contract’ 4.5 WARRANTIES: Unless otherwise specified in the Contract, in addition to and without limiting any other warranties, remedies or rights of UNOPS stated in or arising under the Contract, the Contractor warrants and represents that:

4.5.1 The goods, including all packaging and packing thereof, conform to the specifications of the Contract, are fit for the purposes for which such goods are ordinarily used and for any purposes expressly made known in writing in the Contract, and shall be of even quality, free from faults and defects in design, material, manufacturer and workmanship;

4.5.2 If the Contractor is not the original manufacturer of the goods, the Contractor shall provide UNOPS with the benefit of all manufacturers’ warranties in addition to any other warranties required to be provided under the Contract;

4.5.3 The goods are of the quality, quantity and description required by the Contract, including when subjected to conditions prevailing in the place of final destination;

The goods are free from any right of claim by any third-party, including claims of infringement of any 4.5.4intellectual property rights, including, but not limited to, patents, copyright and trade secrets;

4.5.5 The goods are new and unused;

4.5.6 All warranties will remain fully valid following any delivery of the goods and for a period of not less than one (1) year following acceptance of the goods by UNOPS in accordance with the Contract;

4.5.7 During any period in which the Contractor’s warranties are effective, upon notice by UNOPS that the goods do not conform to the requirements of the Contract, the Contractor shall promptly and at its own expense correct such non-conformities or, in case of its inability to do so, replace the defective goods with goods of the same or better quality or, at its own cost, remove the defective goods and fully reimburse UNOPS for the purchase price paid for the defective goods; and,

4.5.8 The Contractor shall remain responsive to the needs of UNOPS for any services that may be required in connection with any of the Contractor’s warranties under the Contract.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-21

Animal Crematory Design for Pets Cremation Business Model A1500

Posted on 2021-08-192021-08-19 by medical-waste-incinerator

Model

A1500(Movable platform & Automobile.

Picture

Burning Rate

Average 50 kgs/hour

Feed Capacity

Average 150 kgs/feeding

Main Combustion Chamber

1500 Liters

Secondary Combustion Chamber

500 Liters

Mix Combustion Chamber

Yes

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V/380V

Gas Form

Diesel Oil/ Organic Gas/LPG

Burner

Italy Original

Oil Consumption (Diesel Oil)

Average 34 kg/hour

Gas Consumption (Natural gas )

Average 41 m3n/hour

Internal Dimensions

150 x 100 x 96cm (primary room )

External Dimensions

240 x 170 x 380cm (without chimney)

Temperature Monitor

Yes

Oil Tank Capacity(if oil fuel)

300 Liters

Door Opening

59 x 81cm

Chimney Length

10.0 Meters

Chimney Sort

Stainless Steel

Equipment Gross Weight

7500 kgs

Operation Technical Specifications

Main Chamber Temperature

800℃–1000℃

Secondary Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Burning Efficiency

＞98 percent

Waste Lower Calorific Power

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

3000Kcal

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Chambers for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

For other creature incineration

	Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	Combustion Chamber
1200L	1500L	2000L	3000L	Internal Dimensions
120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber
600L	750L	1000L	1500L	Smoke Filter Chamber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode
Manual	Manual	Manual	Manual	Voltage
220V	220V	220V	220V	Electricity
1.38Kw	1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)
Ave.20.4	Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)
Ave.24.5	Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor
Yes	Yes	Yes	Yes	Temperature Protection
Yes	Yes	Yes	Yes	Oil Tank
200L	300L	500L	500L	Chimney
10Meter	10Meter	14Meter	14Meter	Chimney Type
Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature
800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time
2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight
6000kg	8500kg	11000kg	16000kg	External Dimensions
260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm