首页 » Hospital-Incinerators

Treatment and disposal technologies for health care waste

Posted on 2021-08-222021-08-22 by medical-waste-incinerator

Items/Model

TS75

Picture

Principle

Solid Waste Incineration

Burn Rate

Average 75 kg/hour

Feed Capacity

Average 100kg

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

600L

Internal Dimensions

100x60x100cm

Secondary Chamber

300L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

3.0Kw

Oil Consumption (L/Hour)

15-20

Natural Gas Consumption (m3n/hour)

**

Temperature Monitor

Digital Screen

Temperature Protection

Yes

Oil Tank

250L

Feed Door

Dia.55cm

Chimney

6 Meters

Chimney Sort

Stainless Steel

1st.

800℃–1000℃

2nd.

Gross Weight

2500kg

External Dimensions

2080x1100x3840cm(without chimney)

HICLOVER Incinerator/Parts Range

Main Feature

Medical Waste Incinerators	HICLOVER 10-500kgs/Hr.Double Combustion Chambers
Single Combustion Chamber	Small, Cheap,10-20kgs/Hr.
Three Combustion Chambers(Optional)	3 Ranked for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For additional creature incineration
	Items/Model

The forecasted feedstock loads, and daily loading rates are generally summarized as:

• Mixed general, clinical and incinerable hazardous wastes with a wide range of calorific values and densities. The wastes will consist of 100% biomedical wastes.

• Wastes either small enough to fit within a 60 litre waste sack or broken up or shredded to less than 300mm in size.

• Operation on a daytime shift basis, 5 days per week.

TS100(PLC)

TS150(PLC)	TS300(PLC)	TS500(PLC)	Burn Rate (Typical )	100 kg/hour
150 kg/hour	300 kg/hour	500 kg/hour	Control Mode	PLC Auto.
PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber	1200L
1500L	2000L	3000L	Internal Dimensions	120x100x100cm
150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber	600L
750L	1000L	1500L	Smoke Filter Chamber	Dry Scrubber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode	Manual
Manual	Manual	Manual	Voltage	220V
220V	220V	220V	Power	1.38Kw
1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4
Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5
Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor	Yes
Yes	Yes	Yes	Temperature Protection	Yes
Yes	Yes	Yes	Oil Tank	200L
300L	500L	500L	Chimney	10Meter
10Meter	14Meter	14Meter	Chimney Type	Stainless Steel
Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature	800℃–1000℃
800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time	2.0 Sec.
2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight	6000kg
8500kg	11000kg	16000kg	External Dimensions	260x150x180cm
300x160x190cm	400x210x300cm	450x210x300cm

The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers.

“Warranty will be as per the UNOPS ‘contracts for the provision of goods’ under section 4.5 of the ‘general conditions of contract’ 4.5 WARRANTIES: Unless otherwise specified in the Contract, in addition to and without limiting any other warranties, remedies or rights of UNOPS stated in or arising under the Contract, the Contractor warrants and represents that:

4.5.1 The goods, including all packaging and packing thereof, conform to the specifications of the Contract, are fit for the purposes for which such goods are ordinarily used and for any purposes expressly made known in writing in the Contract, and shall be of even quality, free from faults and defects in design, material, manufacturer and workmanship;

4.5.2 If the Contractor is not the original manufacturer of the goods, the Contractor shall provide UNOPS with the benefit of all manufacturers’ warranties in addition to any other warranties required to be provided under the Contract;

4.5.3 The goods are of the quality, quantity and description required by the Contract, including when subjected to conditions prevailing in the place of final destination;

The goods are free from any right of claim by any third-party, including claims of infringement of any 4.5.4intellectual property rights, including, but not limited to, patents, copyright and trade secrets;

4.5.5 The goods are new and unused;

4.5.6 All warranties will remain fully valid following any delivery of the goods and for a period of not less than one (1) year following acceptance of the goods by UNOPS in accordance with the Contract;

4.5.7 During any period in which the Contractor’s warranties are effective, upon notice by UNOPS that the goods do not conform to the requirements of the Contract, the Contractor shall promptly and at its own expense correct such non-conformities or, in case of its inability to do so, replace the defective goods with goods of the same or better quality or, at its own cost, remove the defective goods and fully reimburse UNOPS for the purchase price paid for the defective goods; and,

4.5.8 The Contractor shall remain responsive to the needs of UNOPS for any services that may be required in connection with any of the Contractor’s warranties under the Contract.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-21

Medical waste Control pdf

Posted on 2021-08-212021-08-21 by medical-waste-incinerator

The Incinerator units shall be designed to last in operation in a tropical environment for a minimum period of 10 years if the specified maintenance schedule is followed. All metal surfaces (except combustion chamber internal fittings) shall be either galvanized, enameled, painted or otherwise treated against atmospheric and process induced corrosion,Medical waste management pdf.

The incinerator combustion chamber(s) should be designed for easy maintenance of all internal parts including the refractory and insulation. Materials used in the individual parts of the incinerator shall be heat resistance and also be protected against oxidation, corrosion, etc.

The incinerator shell shall be made of mild steel with an adequate thickness for small units of between 3-6mm and larger units 5-10 mm depending on the construction part and painted externally with heat resistant aluminum paint suitable to withstand 250° C. The outside surface temperature of the incinerator casing should not exceed 50° C above ambient temperature and shall include a safety mesh around all hot surfaces. Cold face refractory lining of calcium silicate or superior material, minimum thickness 100 mm.

	Three Combustion Chambers(Optional)
3 Ranked for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment
For other animal incineration
Items/Model	TS100(PLC)
TS150(PLC)	TS300(PLC)

TS500(PLC)

Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour	500 kg/hour
Control Mode	PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber
1200L	1500L	2000L	3000L	Internal Dimensions
120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber
600L	750L	1000L	1500L	Smoke Filter Chamber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode
Manual	Manual	Manual	Manual	Voltage
220V	220V	220V	220V	Power
1.38Kw	1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)
Ave.20.4	Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)
Ave.24.5	Ave.29	Ave.39.6	Ave.52.8	Infection Monitor
Yes	Yes	Yes	Yes	Temperature Protection
Yes	Yes	Yes	Yes	Oil Tank
200L	300L	500L	500L	Chimney
10Meter	10Meter	14Meter	14Meter	Chimney Type
Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature
800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time
2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight
6000kg	8500kg	11000kg	16000kg	External Dimensions
260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm
			2021-02-21	450x210x300cm

All incinerators shall meet the following emission and operating standards:

• Combustion efficiency (C.E.) shall be at least 99.0%

• The combustion efficiency shall be computed as follows:

o C.E = (CO2 X 100) / (%CO2 +%CO)

Suitably designed pollution control devices such as scrubbers, filters or electrostatic precipitators, shall be installed/retrofitted with the incinerator to achieve emission limits.”

“Each unit shall include a complete vertical exhaust and stack system, including the following features:

• Steel construction.

• Refractory lining in the lower section.

• The exit height of the stack shall be not less than a range of 3-12 metres above ground level depending on the capacity of the incinerator unit.

• The diameter of the stack shall be selected by the Contractor to deliver an exhaust exit velocity of not less than 10 metres per second vertically upwards when at full scale operation.

• An emission stack sampling port shall be included immediately above the secondary chamber.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-21

Animal Crematory Design for Pets Cremation Business Model A1500

Posted on 2021-08-192021-08-19 by medical-waste-incinerator

Model

A1500(Movable platform & Automobile.

Picture

Burning Rate

Average 50 kgs/hour

Feed Capacity

Average 150 kgs/feeding

Main Combustion Chamber

1500 Liters

Secondary Combustion Chamber

500 Liters

Mix Combustion Chamber

Yes

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V/380V

Gas Form

Diesel Oil/ Organic Gas/LPG

Burner

Italy Original

Oil Consumption (Diesel Oil)

Average 34 kg/hour

Gas Consumption (Natural gas )

Average 41 m3n/hour

Internal Dimensions

150 x 100 x 96cm (primary room )

External Dimensions

240 x 170 x 380cm (without chimney)

Temperature Monitor

Yes

Oil Tank Capacity(if oil fuel)

300 Liters

Door Opening

59 x 81cm

Chimney Length

10.0 Meters

Chimney Sort

Stainless Steel

Equipment Gross Weight

7500 kgs

Operation Technical Specifications

Main Chamber Temperature

800℃–1000℃

Secondary Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Burning Efficiency

＞98 percent

Waste Lower Calorific Power

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

3000Kcal

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Chambers for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

For other creature incineration

	Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	Combustion Chamber
1200L	1500L	2000L	3000L	Internal Dimensions
120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber
600L	750L	1000L	1500L	Smoke Filter Chamber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode
Manual	Manual	Manual	Manual	Voltage
220V	220V	220V	220V	Electricity
1.38Kw	1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)
Ave.20.4	Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)
Ave.24.5	Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor
Yes	Yes	Yes	Yes	Temperature Protection
Yes	Yes	Yes	Yes	Oil Tank
200L	300L	500L	500L	Chimney
10Meter	10Meter	14Meter	14Meter	Chimney Type
Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature
800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time
2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight
6000kg	8500kg	11000kg	16000kg	External Dimensions
260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2020-11-04

The cost of a small incinerator

Posted on 2021-08-172021-08-17 by medical-waste-incinerator

Medical Waste Incinerator Capacity: Typical 50-100 kgs Each hour

Items/Model

TS50(PLC)

Picture

Principle

Medical Waste Incineration

Burn Rate

Average 50-100 kg/hour

Feed Capacity

Average 100kg/feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

560L

Internal Dimensions

100x80x70cm

Secondary Chamber

280L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

0.7Kw

Oil Infection (kg/hour)

Typical 16.9

Gas Consumption (m3/hour)

Typical 20.2

Infection Monitor

Digital Screen

Temperature Protection

Yes

Oil Tank

100L

Feed Door

70x55cm

Chimney

5Meter

Chimney Type

Stainless Steel

1st.

Gross Weight

4500kg

External Dimensions

230x130x155cm

Optional Part: Stainless Steel Wet scrubber

HICLOVER Incinerator/Parts Range

Main Feature

Medical Waste Incinerators

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

HICLOVER 10-500kgs/Hr.Double Combustion Chambers

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

Single Combustion Chamber	Small, Cheap,10-20kgs/Hr.
Three Combustion Chambers(Optional)	3 Chambers for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For other creature incineration
	Items/Model
TS100(PLC)	TS150(PLC)

TS300(PLC)

TS500(PLC)	Burn Speed (Average)	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
PLC Auto.	Combustion Chamber	1200L	1500L	2000L
3000L	Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm
210x120x120cm	Secondary Chamber	600L	750L	1000L
1500L	Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Dry Scrubber	Feed Mode	Manual	Manual	Manual
Manual	Voltage	220V	220V	220V
220V	Power	1.38Kw	1.69Kw	2.57Kw
4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33
Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6
Ave.52.8	Infection Monitor	Yes	Yes	Yes
Yes	Temperature Protection	Yes	Yes	Yes
Yes	Oil Tank	200L	300L	500L
500L	Chimney	10Meter	10Meter	14Meter
14Meter	Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel
Stainless Steel	1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃
800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
1000℃-1200℃	Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.
2.0 Sec.	Gross Weight	6000kg	8500kg	11000kg
16000kg	External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm
450x210x300cm

Sudan Kassala state and we are working on installing an incinerator for Girba hospital in Girba locality.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2020-10-28

Hospital waste Overall waste incinerator

Posted on 2021-08-152021-08-15 by medical-waste-incinerator

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

The equipment proposed Will be an incinerator specialised for Medical Wastes.

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

Three Combustion Chambers(Optional)	3 Ranked for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For other creature incineration
	Items/Model
TS100(PLC)	TS150(PLC)
TS300(PLC)	TS500(PLC)

Burn Speed (Typical )

100 kg/hour	150 kg/hour	300 kg/hour	500 kg/hour	Control Mode
PLC Auto.	PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber
1200L	1500L	2000L	3000L	Internal Dimensions
120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber
600L	750L	1000L	1500L	Smoke Filter Chamber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode
Manual	Manual	Manual	Manual	Voltage
220V	220V	220V	220V	Power
1.38Kw	1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)
Ave.20.4	Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)
Ave.24.5	Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor
Yes	Yes	Yes	Yes	Temperature Protection
Yes	Yes	Yes	Yes	Oil Tank
200L	300L	500L	500L	Chimney
10Meter	10Meter	14Meter	14Meter	Chimney Type
Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature
800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time
2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight
6000kg	8500kg	11000kg	16000kg	External Dimensions
260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm
			2020-10-07	450x210x300cm

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2020-10-07

HICLOVER 10-500kgs/Hr.Double Combustion Chambers

Posted on 2021-08-132021-08-13 by medical-waste-incinerator

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project.

Three Combustion Chambers(Optional)	3 Chambers for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For additional creature incineration
	Items/Model
TS100(PLC)	TS150(PLC)
TS300(PLC)	TS500(PLC)

Burn Speed (Typical )

100 kg/hour	150 kg/hour	300 kg/hour	500 kg/hour	Control Mode
PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber	1200L
1500L	2000L	3000L	Internal Dimensions	120x100x100cm
150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber	600L
750L	1000L	1500L	Smoke Filter Chamber	Dry Scrubber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode	Manual
Manual	Manual	Manual	Voltage	220V
220V	220V	220V	Electricity	1.38Kw
1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4
Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5
Ave.29	Ave.39.6	Ave.52.8	Infection Monitor	Yes
Yes	Yes	Yes	Temperature Protection	Yes
Yes	Yes	Yes	Oil Tank	200L
300L	500L	500L	Chimney	10Meter
10Meter	14Meter	14Meter	Chimney Type	Stainless Steel
Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature	800℃–1000℃
800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time	2.0 Sec.
2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight	6000kg
8500kg	11000kg	16000kg	External Dimensions	260x150x180cm
300x160x190cm	400x210x300cm	450x210x300cm
	2020-09-17	300x160x190cm	400x210x300cm	450x210x300cm

TECH SPECS FOR 200KGHOUR INCINERATOR

The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg

The Temperatures of combustion: Minimum will be 850oC and max 1400oC

Post combustion: >1100oC.

The Internal diameter of the Chimney: Ø 400mm² and its height: 8 m

The Volume of the combustion chamber: 1.200 L

The Dimension of the door for loading in cm: 70×70.



* Burner with fuel, mono-bloc casting guiding type with horizontal flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.

* A secondary injection of air to ensure perfect oxygen content.

A control box ensuring the complete cycle of combustion.

Fan:

* Electro-ventilator distributing the secondary air, the regulation of the air flow being carried out by valves and following the control of the automatic cycle.

Controls and regulations:

Control box water tight to dust, including:

* A switch circuit breaker for each engine (ventilators and burners).

* A timer with adjustable temporization for the regulation of each burner.

* A regulator with digital watching for the temperature of combustion.

* A regulator with digital watching for the temperature of post combustion.

* Electric box.

The de- ashing must be done in the bottom of the combustion chamber or the deashing should be Automatic or manual batch de ashing.

Process Filtering system: Scruber to be mentioned as optional

Emission Standards Compliance: BS 3316 or equivalent standard

Capacity to treat Plastic: Not less than 40% by weight

The supplier must give batches of spare parts of first urgency and consumable of the incinerator.

The installed incinerator must bear a one year guarantee.

The supplier shall perform an onsite installation of the incinerator.

The technical training of operators will have to be provided and given by a technician from

the factory; it will consist of curative and preventive maintenance, and the use of machine, etc

Fence Wire for Incinerator House (Chain Link) should be NOT less than 2.5Meters height.

Waste Storage Bay and Ash Pit drawings attached.

This material and equipment must include in the shed of the incinerator: foundation in rubble stone, isolation roofing against humidity; elevation with brick of 20 cm (bloc cement), continuing lintel (linteau) in reinforced concrete; steel frame (charpenteen metal);

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

2020-09-17

Best Feeding Door HICLOVER 10-500kgs/Hr.Double Combustion Chambers Waste Incinerators

Posted on 2021-08-122021-08-12 by medical-waste-incinerator

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

HICLOVER is currently offering a broad selection of medical waste incinerators, designed to provide efficient waste destruction, using best available technologies and environmentally friendly procedure. Due to the secondary room with its 2 minute retention period, our healthcare incinerator range is well suited to process clinical waste.

Our products guarantee effective, clean and hassle-free disposal of medical waste is possible. The incineration of clinical waste such as pathological waste (red bag waste), Biohazards & Sharps, General Medical Waste, from Hospitals, Research Center, Pharmaceutical Companies, Medication Manufactures, Primary Care Trusts, Cosmetic Surgery Clinics, Nursing Homes, Care Homes and other Clinical Waste.

Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)	TS500(PLC)
Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour	500 kg/hour
Control Mode	PLC Auto.	PLC Auto.	PLC Auto.	PLC Auto.
Combustion Chamber	1200L	1500L	2000L	3000L
Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm
Secondary Chamber	600L	750L	1000L	1500L
Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Feed Mode	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V
Electricity	1.38Kw	1.69Kw	2.57Kw	4.88Kw
Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33	Ave.44
Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6	Ave.52.8
Infection Monitor	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes
Oil Tank	200L	300L	500L	500L
Feed Door	80x60cm	80x60cm
Chimney	10Meter	10Meter	14Meter	14Meter
Chimney Form	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	6000kg	8500kg	11000kg	16000kg
External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm

Type of waste: medical and industrial (solid and semi solid hazardous)

Type of waste : Bio-medical & Hazardous (Solid and Semi Solid)

If you are a hospital then Please also tell how many bedded hospital : No aren’t a hospital

Quantity of waste generated per day in kg : 6000 kg

Duration C incinerator will be used per day :1 C 16 hours

Approximate moisture content: 47 to 53%

Availability of power and type : 3 Phase, 440 Volts

Details of space available : Min. 10000 Sq. ft.

Do you require an automatic loading system? Depends if it is a continuous burning or interval burning.

How soon do you require the system to be delivered? 8 weeks

Whether the location is a coastal area : No

An other specific requirements: Automatic PLC Control System.

Burning Rate: 500kg/hour

Volumetric capacity Primary Chamber: 500kg

Burner Type: Diesel Operated

Burning Process: Continuous

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

2020-09-16

General waste incinerator, dual chamber (primary & secondary)

Posted on 2021-08-112021-08-11 by medical-waste-incinerator

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.

Items/Model

TS30(PLC)

Picture

Burn Speed

Typical 30-50 kg/hour

Feed Capacity

Typical 60kg/feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

330L

Internal Dimensions

75x75x60cm

Secondary Chamber

180L

Smoke Filter Chamber

Yes

Feed Mode

Manual Feeding

Voltage

220V

Electricity

1.0 Kw

Oil Consumption (kg/hour)

Typical 13.3

Gas Consumption (N.G, m3n/Hour)

***

Gas Consumption (L.P.G, m3n/Hour)

***

Temperature Monitor

Four Digital Display

Temperature Protection

Yes

Oil Tank

600L

Feed Door

55x50cm

Chimney

5Meter

Chimney Sort

Stainless Steel

1st.

800℃–1000℃

2nd. Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Gross Weight

3000kg

External Dimensions

General waste incinerator, dual chamber (primary & secondary), average waste production 200kg/day, nominal burning rate 25 kg/hr (200 kg per 8 hours per day). 380/400 Vac ±10%, 50Hz ±3%, 3Ph or 220/240Vac ±10%, 50Hz ±3%, 1Ph. Diesel fuel storage capacity of the unit for 5 working days in 8 hours each. Minimum life expectancy of 10 years. Meet EU CEC 2000, US AP42, EPA 1995 standards of emissions and operations or equivalent.General waste incinerator, dual chamber (primary & secondary), average waste production 125kg/day, nominal burning rate 15.63 kg/hr (125 kg per 8 hours per day). 380/400 Vac ±10%, 50Hz ±3%, 3Ph or 220/240Vac ±10%, 50Hz ±3%, 1Ph. Diesel fuel storage capacity of the unit for 5 working days in 8 hours each. Minimum life expectancy of 10 years. Meet EU CEC 2000, US AP42, EPA 1995 standards of emissions and operations or equivalent.General waste incinerator, dual chamber (primary & secondary), average waste production 75kg/day, nominal burning rate 9.4 kg/hr (75 kg per 8 hours per day). 380/400 Vac ±10%, 50Hz ±3%, 3Ph or 220/240Vac ±10%, 50Hz ±3%, 1Ph. Diesel fuel storage capacity of the unit for 5 working days in 8 hours each. Minimum life expectancy of 10 years. Meet EU CEC 2000, US AP42, EPA 1995 standards of emissions and operations or equivalent.

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator