Category Archives: Hospital-Incinerators
Treatment and disposal technologies for health care waste
Items/Model
TS75
Picture
Principle
Solid Waste Incineration
Burn Rate
Average 75 kg/hour
Feed Capacity
Average 100kg
Control Mode
PLC(Programmable Logic Controller Incinerator)
Combustion Chamber
600L
Internal Dimensions
100x60x100cm
Secondary Chamber
300L
Smoke Filter Chamber
Yes
Feed Mode
Manual
Voltage
220V
Power
3.0Kw
Oil Consumption (L/Hour)
15-20
Natural Gas Consumption (m3n/hour)
**
Temperature Monitor
Digital Screen
Temperature Protection
Yes
Oil Tank
250L
Feed Door
Dia.55cm
Chimney
6 Meters
Chimney Sort
Stainless Steel
1st.
800℃–1000℃
2nd.
Gross Weight
2500kg
External Dimensions
2080x1100x3840cm(without chimney)
HICLOVER Incinerator/Parts Range
Main Feature
|
Medical Waste Incinerators |
HICLOVER 10-500kgs/Hr.Double Combustion Chambers |
|
Single Combustion Chamber |
Small, Cheap,10-20kgs/Hr. |
|
Three Combustion Chambers(Optional) |
3 Ranked for high risk waste |
|
Pet Cremation Equipment |
For Pet(small/big) Cremation Business |
|
Animal Incineration Equipment |
For additional creature incineration |
|
|
Items/Model |
The forecasted feedstock loads, and daily loading rates are generally summarized as:
• Mixed general, clinical and incinerable hazardous wastes with a wide range of calorific values and densities. The wastes will consist of 100% biomedical wastes.
• Wastes either small enough to fit within a 60 litre waste sack or broken up or shredded to less than 300mm in size.
• Operation on a daytime shift basis, 5 days per week.
TS100(PLC)
|
TS150(PLC) |
TS300(PLC) |
TS500(PLC) |
Burn Rate (Typical ) |
100 kg/hour |
|
150 kg/hour |
300 kg/hour |
500 kg/hour |
Control Mode |
PLC Auto. |
|
PLC Auto. |
PLC Auto. |
PLC Auto. |
Combustion Chamber |
1200L |
|
1500L |
2000L |
3000L |
Internal Dimensions |
120x100x100cm |
|
150x100x100cm |
170x120x100cm |
210x120x120cm |
Secondary Chamber |
600L |
|
750L |
1000L |
1500L |
Smoke Filter Chamber |
Dry Scrubber |
|
Dry Scrubber |
Dry Scrubber |
Dry Scrubber |
Feed Mode |
Manual |
|
Manual |
Manual |
Manual |
Voltage |
220V |
|
220V |
220V |
220V |
Power |
1.38Kw |
|
1.69Kw |
2.57Kw |
4.88Kw |
Diesel Oil Consumption (kg/hour) |
Ave.20.4 |
|
Ave.24.2 |
Ave.33 |
Ave.44 |
Natural Gas Consumption (m3n/hour) |
Ave.24.5 |
|
Ave.29 |
Ave.39.6 |
Ave.52.8 |
Temperature Monitor |
Yes |
|
Yes |
Yes |
Yes |
Temperature Protection |
Yes |
|
Yes |
Yes |
Yes |
Oil Tank |
200L |
|
300L |
500L |
500L |
Chimney |
10Meter |
|
10Meter |
14Meter |
14Meter |
Chimney Type |
Stainless Steel |
|
Stainless Steel |
Stainless Steel |
Stainless Steel |
1st. Chamber Temperature |
800℃–1000℃ |
|
800℃–1000℃ |
800℃–1000℃ |
800℃–1000℃ |
2nd. Chamber Temperature |
1000℃-1200℃ |
|
1000℃-1200℃ |
1000℃-1200℃ |
1000℃-1200℃ |
Residency Time |
2.0 Sec. |
|
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
Gross Weight |
6000kg |
|
8500kg |
11000kg |
16000kg |
External Dimensions |
260x150x180cm |
|
300x160x190cm |
400x210x300cm |
450x210x300cm |
|
|
The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers.
“Warranty will be as per the UNOPS ‘contracts for the provision of goods’ under section 4.5 of the ‘general conditions of contract’ 4.5 WARRANTIES: Unless otherwise specified in the Contract, in addition to and without limiting any other warranties, remedies or rights of UNOPS stated in or arising under the Contract, the Contractor warrants and represents that:
4.5.1 The goods, including all packaging and packing thereof, conform to the specifications of the Contract, are fit for the purposes for which such goods are ordinarily used and for any purposes expressly made known in writing in the Contract, and shall be of even quality, free from faults and defects in design, material, manufacturer and workmanship;
4.5.2 If the Contractor is not the original manufacturer of the goods, the Contractor shall provide UNOPS with the benefit of all manufacturers’ warranties in addition to any other warranties required to be provided under the Contract;
4.5.3 The goods are of the quality, quantity and description required by the Contract, including when subjected to conditions prevailing in the place of final destination;
The goods are free from any right of claim by any third-party, including claims of infringement of any 4.5.4intellectual property rights, including, but not limited to, patents, copyright and trade secrets;
4.5.5 The goods are new and unused;
4.5.6 All warranties will remain fully valid following any delivery of the goods and for a period of not less than one (1) year following acceptance of the goods by UNOPS in accordance with the Contract;
4.5.7 During any period in which the Contractor’s warranties are effective, upon notice by UNOPS that the goods do not conform to the requirements of the Contract, the Contractor shall promptly and at its own expense correct such non-conformities or, in case of its inability to do so, replace the defective goods with goods of the same or better quality or, at its own cost, remove the defective goods and fully reimburse UNOPS for the purchase price paid for the defective goods; and,
4.5.8 The Contractor shall remain responsive to the needs of UNOPS for any services that may be required in connection with any of the Contractor’s warranties under the Contract.
CE Certification PassHICLOVER Solution for Fighting COVID-19 with CE Certification.
1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)
2. Auto Roll Air Filter for Clean Room
2021-02-21
2021-02-21
incinerators for sale
get HICLOVER new incinerators for sale, call us +86-25-8461 0201 and receive free quotation document from us. We supply single combustion chamber, dual glazing chambers, three combustion chambers and multi-combustion chambers waste incinerators for lab, hospital, clinic, medical center, hygiene clinical waste destruction with medical disposable, biological waste, medical plastic waste, toxic waste, red bag waste, needle disposal, gauze and bandages, sealed sharp containers, pathological waste, trace-chemotherapeutic wastes, etc..
| Items/Model | TS10(PLC) | TS20(PLC) | TS30(PLC) | TS50(PLC) | TS100(PLC) |
| Burn Rate | 10 kg/hour | 20 kg/hour | 30 kg/hour | 50 kg/hour | 100 kg/hour |
| Feed Capacity | 20kg | 40kg | 60kg | 100kg | 200 kg |
| Control Mode | PLC | PLC | PLC | PLC | PLC |
| Combustion Chamber | 100L | 210L | 330L | 560L | 1200L |
| Internal Dimensions | 50x50x40cm | 65x65x50cm | 75x75x60cm | 100x80x70cm | 120x100x100cm |
| Secondary Chamber | 50L | 110L | 180L | 280L | 600L |
| Smoke Filter Chamber | Yes | Yes | Yes | Yes | Yes |
| Feed Mode | Manual | Manual | Manual | Manual | Manual |
| Voltage | 220V | 220V | 220V | 220V | 220V |
| Power | 0.5Kw | 0.5Kw | 0.5Kw | 0.7Kw | 0.7Kw |
| Oil Consumption (kg/hour) | 5.4–12.6 | 7.8–16.3 | 10.2–20 | 12.1–24 | 14–28 |
| Gas Consumption (m3/hour) | 6.2–11.4 | 8–15.7 | 9.8–20 | 9.9–26.1 | 10–32.2 |
| Temperature Monitor | Yes | Yes | Yes | Yes | Yes |
| Temperature Protection | Yes | Yes | Yes | Yes | Yes |
| Oil Tank | 100L | 100L | 100L | 100L | 200L |
| Feed Door | 30x30cm | 45x40cm | 55x50cm | 70x55cm | 80x60cm |
| Chimney | 3Meter | 3Meter | 5Meter | 5Meter | 10Meter |
| Chimney Type | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| 1st. Chamber Temperature | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ | 800℃–1000℃ |
| 2nd. Chamber Temperature | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ | 1000℃-1200℃ |
| Residency Time | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. | 2.0 Sec. |
| Gross Weight | 1500kg | 2200kg | 3000kg | 4500kg | 6000kg |
| External Dimensions | 140x90x120cm | 160x110x130cm | 175x120x140cm | 230x130x155cm | 260x150x180cm |
Waste Incineration Treatment Model TS1000 1000kgs per hour Shirt Feeding
Items/Model
TS1000
Picture
Principle
Waste Incineration Treatment
Burn Rate
Average 1000 kg/hour
Feed Capacity
Average 3000kg/feeding
Control Mode
PLC(Programmable Logic Controller Incinerator)
Combustion Chamber
4800Liter
Internal Dimensions
400*120*100 cm
Secondary Chamber
1000Liter
Feed Mode
Manual/Forklift
Voltage
220V/380V
Electricity
5.0Kw
Oil Infection (kg/hour)
Average 67(DO)
Gas Consumption (m3/hour)
***
Temperature Monitor
Digital Screen
Temperature Protection
Yes
Oil Tank
800Liter
Feed Door
300x120cm(Electric Opening)
Chimney
6Meter
Chimney Type
Stainless Steel
1st.
800℃–1000℃
2nd. Chamber Temperature
1000℃-1200℃
Residency Time
2.0 Sec.
Gross Weight
18000kg
External Dimensions
700x220x320cm(without chimney)
Email: [email protected]
Email: [email protected]
Email: [email protected]
Nanjing Clover Medical Technology Co.,Ltd.
|
|
HICLOVER Incinerator/Parts Range |
|
Main Feature |
Medical Waste Incinerators |
|
HICLOVER 10-500kgs/Hr.Double Combustion Chambers |
Single Combustion Chamber |
|
Small, Cheap,10-20kgs/Hr. |
Three Combustion Chambers(Optional) |
|
3 Ranked for high risk waste |
Pet Cremation Equipment |
|
For Pet(small/big) Cremation Business |
Animal Incineration Equipment |
For other animal incineration
|
|
Items/Model |
TS100(PLC) |
TS150(PLC) |
TS300(PLC) |
|
TS500(PLC) |
Burn Speed (Typical ) |
100 kg/hour |
150 kg/hour |
300 kg/hour |
|
500 kg/hour |
Control Mode |
PLC Auto. |
PLC Auto. |
PLC Auto. |
|
PLC Auto. |
Combustion Chamber |
1200L |
1500L |
2000L |
|
3000L |
Internal Dimensions |
120x100x100cm |
150x100x100cm |
170x120x100cm |
|
210x120x120cm |
Secondary Chamber |
600L |
750L |
1000L |
|
1500L |
Smoke Filter Chamber |
Dry Scrubber |
Dry Scrubber |
Dry Scrubber |
|
Dry Scrubber |
Feed Mode |
Manual |
Manual |
Manual |
|
Manual |
Voltage |
220V |
220V |
220V |
|
220V |
Electricity |
1.38Kw |
1.69Kw |
2.57Kw |
|
4.88Kw |
Diesel Oil Consumption (kg/hour) |
Ave.20.4 |
Ave.24.2 |
Ave.33 |
|
Ave.44 |
Natural Gas Consumption (m3n/hour) |
Ave.24.5 |
Ave.29 |
Ave.39.6 |
|
Ave.52.8 |
Temperature Monitor |
Yes |
Yes |
Yes |
|
Yes |
Temperature Protection |
Yes |
Yes |
Yes |
|
Yes |
Oil Tank |
200L |
300L |
500L |
|
500L |
Chimney |
10Meter |
10Meter |
14Meter |
|
14Meter |
Chimney Type |
Stainless Steel |
Stainless Steel |
Stainless Steel |
|
Stainless Steel |
1st. Chamber Temperature |
800℃–1000℃ |
800℃–1000℃ |
800℃–1000℃ |
|
800℃–1000℃ |
2nd. Chamber Temperature |
1000℃-1200℃ |
1000℃-1200℃ |
1000℃-1200℃ |
|
1000℃-1200℃ |
Residency Time |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
|
2.0 Sec. |
Gross Weight |
6000kg |
8500kg |
11000kg |
|
16000kg |
External Dimensions |
260x150x180cm |
300x160x190cm |
400x210x300cm |
CE Certification PassHICLOVER Solution for Fighting COVID-19 with CE Certification.
1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)
2. Auto Roll Air Filter for Clean Room
450x210x300cm
HS Code for waste incinerator 84178050
HS Code for waste incinerator 84178050
|
|
Item |
|
Specification |
Model |
|
TS100 PLC |
Main Product List per 01 set |
|
Main Combustion Chamber |
|
|
Secondary Combustion Chamber |
|
|
Smoke Filter Chamber |
|
|
Incinerator PLC Control Case |
Chimney:10.0Meters |
|
*(upgrade to Stainless Steel, free cost) |
|
|
Italy oil/gas burner: 02 units |
|
|
Oil Tank (if Petroleum fuel): 200Liters |
|
Optional Component: Stainless Steel Wet scrubber
municipal waste incinerators RWANDA
RWANDA medical waste incinerator Available
HICLOVER – Medical Environmental, WWW.HICLOVER.COM, Waste Incinerators,
Medical Waste Incinerator,Pet Animal Cremation, Solid Waste Incinerators
HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator(Containerized Mobile Incinerator)
Tel: +86-25-8461 0201
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Website: www.hiclover.com
Email: [email protected]
Email: [email protected]
Nanjing Clover Medical Technology Co.,Ltd.
Incinérateur de déchets médicaux à air contrôlé conçu pour l'incinération des déchets biomédicaux
Incinérateur de déchets médicaux à air contrôlé conçu pour l’incinération des déchets biomédicaux générés dans un centre de traitement du sang. Les déchets à traiter comprennent principalement les biodéchets (c’est-à-dire les fluides corporels), les déchets infectieux et dangereux tels que les seringues, les aiguilles et autres déchets médicaux (c’est-à-dire les caoutchoucs de silicone, les plastiques, les textiles, les papiers, les emballages, etc.)
Spécifications opérationnelles Spécifications physiques
Volume de la chambre de combustion (m3) 8,80 m3
Taux de combustion * jusqu’à 1500 kg par heure
Consommation moyenne de carburant 65 kg par heure ou plus (7 brûleurs diesel)
Température opérationnelle 850 à 1320 ° C
Rétention de gaz dans la chambre secondaire Grande chambre secondaire
Surveillance de la température Oui
Résidus de cendres moyen (%) 3%
Dispositif thermostatique Oui
Réservoir de fumée diesel 1000l
Laveur de gaz Venture
Système d’alimentation hydraulique de bélier
Grand incinérateur à moteur diesel
Spécification minimale requise
Volume de la chambre de combustion (m3) 8,80 m3
Taux de combustion * jusqu’à 1500 kg par heure
Consommation moyenne de carburant 65 kg par heure ou plus (7 brûleurs diesel)
Température opérationnelle 850 à 1320 ° C
Rétention de gaz dans la chambre secondaire Grande chambre secondaire
Surveillance de la température Oui
Résidus de cendres moyen (%) 3%
Dispositif thermostatique Oui
Réservoir de fumée diesel 1000l
Laveur de gaz Venture
Système d’alimentation hydraulique de bélier
Grand incinérateur à moteur diesel
Spécification minimale requise
Normes
Hospital incinerator maker
Number thing: 01 unit
Could you please send us cataloge detail for Pet Cremation of dogs, cats.
– Please services require: General about Cremation system which is suitable
Containerized Incinerators Operational Capabilities • PROCESS 1+ TONS / DAY • OPERATED WITH LIMITED TRAINING • REGULAR
MAINTENANCE CAN BE COMPLETED WITH LIMITED TRAINING • COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS • ABILITY TO BURN
WASTE LUBRICANTS (POL) • HANDLE ORGANIC SOLIDS (TO INCLUDE RMW) • DEPLOYABLE • MOBILE • 24 HRS OF CONTINUOUS USE •
AUTOMATIC LOADING SYSTEM • AUTOMATED ASH REMOVAL SYSTEM • GAS SCRUBBING SYSTEM • 95% REDUCTION OF SOLID WASTE • OPERATE
OFF DIESEL OR FUEL OIL • CAPABLE OF BURNING 4 UNITS OF WASTE PER UNIT OF FUEL • ABLE TO TAKE ALL COMBUSTIBLE WASTE TO
INCLUDE: PAPER, PLASTIC, CARDBOARD, FOOD, USED OILS, SLUDGE, OILY RAGS, WOOD PALLETS. • NO PRE-TREATMENT OF WASTE
REQUIRED • VENDOR REPAIR OFFERED AT POINT OF SHIPMENT • FIVE (5) YEAR COMPONENT WARRANTY FROM DATE OF ACCEPTANCE
Technical Specifications • OPERATION MANUAL AND TRAINING MANUAL FOR EACH INCINERATOR • SET UP AND INSTALLATION
INSTRUCTION MANUALS • BLUE PRINT/ SCHEMATIC PROVIDED THAT OUTLINES THE PHY SICAL DIMENSIONS OF THE 20′ INCINERATORS •
INCINERATORS COMPOSED WITH HEAVY DUTY WELDED CONSTRUCTION • OPERATED AND TRANSPORTED IN 20′ INCINERATORS (CONTAINERS) •
FULL FRONT AND OPTIONAL REAR ACCESS • PRIMARY / SECONDARY TEMPERATURE CONTROLS • COMBUSTION AIR DAMPER • VAPOR TIGHT
LIGHT FIXTURES & 120V OUTLET • OUTDOOR PLU-IN RECEPTABLE FOR ELECTRICAL SOURCE • OUTDOOR FUEL TRAIN WITH SHUT-OFF • LOAD
RAMP • SKID — MOUNTED FUEL TANK • ELECTRICAL AND FUEL OIL CONNECTORS • CONTROL PANEL AND AIR LOUVER • AIR MANIFOLD
ACCESS AND UTILITY BULKHEAD • GALVANIZED SHIPPING COVERS • FUEL, WATER AND OIL CONNECTOR LINES • PRIMARY AND SECONDARY
BURNERS • FULLY INTEGRATED PLC CONTROL SYSTEM • FACTORY TESTED, WIRED PRIOR TO SHIPMENT • MOBILITY: NO HEAVY LIFT
EQUIPMENT NEEDED FOR SET UP OR TEAR DOWN • HEIGHT RESTRICTED TO THE Greatest POINT ON BASE OR UNDER 15FT TALL
380V, 50Hz, 3Ph)
For your goods, technical transfer and training for operators.
Up to 600kgs per ten-hour day of Form IV pathological waste or red bag waste graded at 2200 BTU’s per kg, according to batch
loading twice every day.
What are the key products of incineration process
Items/Model
TS800
Picture
Principle
Animal Waste Incineration Treatment
Burn Rate
Average 300-450 kg/hour
Feed Capacity
Average 1200kg/feeding
Control Mode
Electric Control
Combustion Chamber
3000Liter
Internal Dimensions
300*100*100 cm
Secondary Chamber
***
Feed Mode
Manual/Forklift
Voltage
220V/380V
Power
5.0Kw
Oil Consumption (kg/hour)
***waste to Power plants cost
Gas Consumption (m3/hour)
Ave.22.8m3n/hr
Temperature Monitor
Digital Display
Temperature Protection
Yes
Oil Tank
***
Feed Door
200x100cm(Electric Opening)
Chimney
3Meter
Chimney Sort
Stainless Steel
1st.
Three Combustion Chambers(Optional)
3 Ranked for high risk waste
Pet Cremation Equipment
For Pet(small/big) Cremation Business
Animal Incineration Equipment
For additional creature incineration
what would be the main products of incineration process
Maximum load of the camera (kg)
|
1200kgs |
Overall dimensions (without burner), (mm) |
|
2823x1970x1724 |
500x220x190cm(without chimney) |
|
2823x1970x1724 room Volume, m3 |
2.5 m3 |
|
300*100*100 cm, 3.0m3 |
EXT.main camera size |
|
(d)2392x (b)1140 |
??? |
|
Size of loading opening, (mm) |
(W)1152x (l)1425 |
W.1000*L.2000mm
|
Combustion temperature (C0) |
650° – 1100° |
800℃–1200℃ |
|
Weight (kg) |
4500 |
7000kg |
|
Weight of residues after combustion (kg) |
no more than 5 percent |
no more than 5 percent |
|
Opening the hatch using a winch |
accessibility |
power-driven |
|
The method of loading |
the vertical |
Top Feeding Door |
|
Burners |
Gas burners |
Gas burners |
|
Fire-resistant gasket,why is medical waste an issue |
Z-blok fire-resistant gasket |
Fire Brick and Refractory castable |
|
Pipe dimensions (diameter, length) (mm) |
1420×3000 |
??? |
|
Benefits of fire-resistant gaskets |
Yes |
yes |
|
Temperature properties of the gasket (C0) |
1650° |
1700°C |
|
Lining layer (fireclay brick)(mm) |
114 |
114mm |
|
Temperature properties of the liner (C0) |
1650° |
1700°C |
|
burner gas (m3 / h) |
9.9-17 m3 / h |
22.8m3n/h max. |
|
Burn rate (kg / h) |
300-450 |
300-450 |
|
Electricity (volts/Hz) |
220/50 Hz |
220/50 Hz |
|
Auto-ignition |
Auto-ignition Yes |
Auto-ignitio |
|
Temperature sensor |
accessibility |
accessibility |
|
Automatic control panel |
the presence of |
yes |
|
Burn time at full load (hour) |
4-8h |
yes |
|
Compliance of MPV and MPC emissions |
contrasts to |
China Standard |
|
Painting |
heat-resistant enamel |
yes |
|
|
Items/Model |
TS100(PLC) |
|
TS150(PLC) |
TS300(PLC) |
TS500(PLC) |
|
Burn Rate (Typical ) |
100 kg/hour |
150 kg/hour |
|
300 kg/hour |
500 kg/hour |
Control Mode |
|
PLC Auto. |
PLC Auto. |
PLC Auto. |
PLC Auto.
|
Combustion Chamber |
1200L |
1500L |
2000L |
3000L |
|
Internal Dimensions |
120x100x100cm |
150x100x100cm |
170x120x100cm |
210x120x120cm |
|
Secondary Chamber |
600L |
750L |
1000L |
1500L |
|
Smoke Filter Chamber |
Dry Scrubber |
Dry Scrubber |
Dry Scrubber |
Dry Scrubber |
|
Feed Mode |
Manual |
Manual |
Manual |
Manual |
|
Voltage |
220V |
220V |
220V |
220V |
|
Electricity |
1.38Kw |
1.69Kw |
2.57Kw |
4.88Kw |
|
Diesel Oil Consumption (kg/hour) |
Ave.20.4 |
Ave.24.2 |
Ave.33 |
Ave.44 |
|
Natural Gas Consumption (m3n/hour) |
Ave.24.5 |
Ave.29 |
Ave.39.6 |
Ave.52.8 |
|
Infection Monitor |
Yes |
Yes |
Yes |
Yes |
|
Temperature Protection |
Yes |
Yes |
Yes |
Yes |
|
Oil Tank |
200L |
300L |
500L |
500L |
|
Chimney |
10Meter |
10Meter |
14Meter |
14Meter |
|
Chimney Type |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
|
1st. Chamber Temperature |
800℃–1000℃ |
800℃–1000℃ |
800℃–1000℃ |
800℃–1000℃ |
|
2nd. Chamber Temperature |
1000℃-1200℃ |
1000℃-1200℃ |
1000℃-1200℃ |
1000℃-1200℃ |
|
Residency Time |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
2.0 Sec. |
|
Gross Weight |
6000kg |
8500kg |
11000kg |
16000kg |
|
External Dimensions |
260x150x180cm |
300x160x190cm |
400x210x300cm |
450x210x300cm |
|
|
|
|
|
2021-02-23 |
|
Gross Weight |
6000kg |
8500kg |
11000kg |
16000kg |
|
External Dimensions |
260x150x180cm |
300x160x190cm |
400x210x300cm |
450x210x300cm |
A heat exchanger to pre-heat air destined for the primary chamber is not compulsory but recommended.
The combustion air systems and fans shall be designed to ensure high combustion efficiency and avoid a reducing (corrosive) atmosphere, incomplete burnout of the flue gases and related problems. It should also be possible to heat the primary air from 10°C to approximately 145°C, depending on the waste composition and moisture content.
“The incinerator shall be designed and equipped to be installed, commissioned and operated in such a way as to prevent emissions into the air giving rise to significant ground-level air pollution; in particular, exhaust gases shall be discharged in a controlled fashion by means of a stack the height of which is calculated in such a way as to safeguard human health and the environment.
CE Certification PassHICLOVER Solution for Fighting COVID-19 with CE Certification.
1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)
2. Auto Roll Air Filter for Clean Room
2021-02-23
