waste disposal incinerator

Incinerator but the size of chamber > 2000 x >1200 mm. Prepare for burn LIQUID Waste +/- 20 liter/hr.
Fueled by Heavy OIL Burner.waste disposal incinerator, capable of handling both wet and dry garbage.. Which include house hold wastes and dry leaves.
The chamber of the incinerator should be able to hold about 200 – 250 kilogram of waste at a given time. edical Waste Incinerators.
The mobile unit is our priority then the fixed units. Medical Waste Incinerators. The mobile unit is our priority then the fixed units.
a;  Batch Capacity for each model, how much load can we put in one time. I need tio under stand in term of batch load one time I can ut in Kgs.
b:  Burning capacity per hour, to know how much time it will take to burn one batch and what is cooling timem for each one.
c: How many batch can we put in each day basis per 24 hours.
d: Most of systems will be run on Gas, so I need to know the required pressure of gas in psi to run the system without any problem.
e; I do wish to know an average life of system and after how many years we need the repair of linning etc.

2. What is your minimum capacity and maximum capacity incinerator.

3. You do provide secodn hand incinerator in good working condition.
4. We need only double chamber double burner incinerator.
5. Please send us DEFRA and DADR approval reports by attachment, copy of ISO and summary of gas emmission report from incinerators.

dispose Medical waste IV

the incinerator can be used to dispose  Medical waste IV, used needles, used syringes, scalpels, used dressing material ,personal protective equipments like gown, gloves etc. amputated body parts, excreta from patients and other laboratory waste.incineration units that can handle a mix of medical and hazardous wastes. The medical wastes include (but are not limited to) materials contaminated with blood, bodily fluids, fecal matter, and human tissue/organs from surgery. The hazardous compounds include (but are not limited to): xylene, toluene, chloroform, methylene chloride, trichloroethylene, acetonitrile, formaldehyde wastes, chemotherapy wastes (e.g., Chlorambucil, Cytoxin, Daunomycin, etc.) radiology wastes (e.g., glutaraldehyde), and mercury-containing compounds.includes amputated body parts, body fluids including contaminated blood, blood products, excreta from patients, cultures of contagious viruses and other laboratory wastes e.t.c.
Medical might also include used needles, used syringes, used , expired or contaminated dressing materials like bandages, plasters and plastics, e.t.c. The Incinerators should also allow for disposal of other wastes generated in hospital environment.Technical Specifications for Portable Incinerators

The Chamber volume of approximately 0.37m3 and a
1     combustible load volume (volume of material) of
approximately 0.30 m3

2     Burner power of approximately 189,000kcal/hour
Maximum Combustion Temperature of up to 1250

Degree Celsius
Type of emitted Gas: Inert and nil environmental pollution effect
Electrical Power: 220V/50 or 60 Hertz

Fuel: Diesel

Electrical consumption of approximately: 0.35 kw/hr

Fuel consumption range: 7 – 11 ltrs/hr

Controls: Incinerator control including control panel, timer, display for monitoring combustion temperature, system error display, etc.
Packaging/Installation: Incinerator fully assembled and ready to be plugged in power source

Instruction manual: Package must be provided with instruction manual including detailed information to installation, operation, maintenance, interpretation of trouble shooting signals and contact telephones
numbers/emails of local or overseas manufacturer’s technicians that can be contacted for guidance on operation of the equipment, if necessary.

training guide/manual on a compact disc including a demonstration for installation, operation and
maintenance, as well as safety guidelines, etc.

Scope of Supply: Package must be provided including
all the required accessories for installation and must
include spare parts/consumables that are required for a
one year period at a combustion rate of up to 8 hours
daily

Warranty must be provided for a 5-years period
starting with the incinerator’s installation and
including the provision of accessories and
consumables

small scale incinerator

Incinerators Biological waste disposal system (incinerator)

Incinerator must meet the following specifications:

–       Combustion capacity (kW) = 581 +/-10%

–       Combustion capacity (kcal/h) = 500,000 +/-10%

–       Max. l/h (at approx.. 50% water content) = 100 +/-10%

Further specifications will be provided with the inquiry.

The incinerator shall be fully self contained.

The incinerator plant shall incorporate a control panel for its operation. On the control panel we shall have a visual display of the chamber temperatures. This visual display must control and monitor the incinerator and his performance.

Capacity of destruction in weight shall be 60 Kg/h.

It should be able to operate not less than 10 hours/day

This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…

Design Specification : Types A, B, C, D, and E of medical waste

“PYROLYTIC” combustion, by controlling the gasification of waste.

The incinerator must avoid the release of black smoke and fine dust, during the loadings.

It shall be able to reduce the volume of wastes by 98%.

It shall be able to hold emission in the second burn with gas residence of not less than 2 seconds.

The incineration should be completely free from visible smoke as well as offensive odours.

1.0The primary ignition burner shall providing ignition of the waste to 850 °C and must switch off to conserve fuel.

The primary combustion chamber shall be constructed from heavy steel plate and the unit is internally lined with a complete layer of hote face refractory and high efficiency insulation.

The Internal diameter of the Chimney at least: ? 400 and its height: 8 m

The Volume of the combustion chamber at least: 1.200 L

The Dimension of the door for loading in cm at least: 70×70.

Burner operation should be Automatic On/Off
Fuel?: diesel

Manufacturer to provide  necessary information for the best of  the installation

The control panel shall have all appropriate audible and visual alarms to ensure safe operation.

This incinerator with “PYROLYTIC” combustion must have:
1.A combustion chamber of waste:
oPerfectly tight door for the manual loading of waste. The loading should be Manual, Batch Load
oA burner of lighting which the use is limited to the ignition of waste.
oFrontage of loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory.
oThe insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminium and insulates bricks in order to assure a minimum temperature on the outside sheet metal.
o Composition of the refractory;

?Refractory concrete :
. Thickness    : ≥100 mm
. Nature: 42% of Al203
?Insulate in fibrous panels :
Thickness: ≥75 mm
Nature: Calcium silicate.
?Burner of lighting of waste, with fuel, standard mono-bloc casting guiding  plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
Plate of combustion in Carborundum, avoiding the fixing of glass and slags

A chamber of post combustion of gases
oA burner of combustion of gases,
oA device of injection of air allowing a total recombustion of gases,
oA device of air inlet of cooling of waste gases,
oA sheath of evacuation of the gases burnt.
oCarcass in strong sheet steel with support of connection.
oComposition of the refractory;
?Refractory concrete :
?Thickness    : ≥150 mm
?Nature: 65% of Al203
?Insulate in fibrous panel :
?Thickness: ≥85 mm
? Nature: Calcium
oBurner with fuel, mono-bloc casting guiding type with horizontal flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
oA secondary injection of air to ensure perfect oxygen content.

A control box ensuring the complete cycle of combustion.

Fan:
oElectro-ventilator distributing the secondary air, the regulation of the air flow being carried out by valves and following the control of the automatic cycle.
Controls and regulations:
Control box watertight to dust, including:

A switch circuit breaker for each engine (ventilators and burners).
A timer with adjustable temporization for the regulation of each burner.
A regulator with digital watching for the temperature of combustion.
A regulator with digital watching for the temperature of post combustion.
Electric box

The secondary combustion chamber must destroy the contaminant product and must resist to high temperature(1100 °C)

Process Filtering system: Scruber to be mentionned as optional

Hypocritical Smoke: The Scandal of Medical Waste Incineration

The middle-class Foxboro subdivision in North Salt Lake City, Utah, is, in many ways, an idyllic community for young families – new, modest, similarly sized homes on fairly compact lots, close by neighbors connected by sidewalks and streetlights, tons of playmates for all the kids. And Mormon communities have lots of kids, munchkins if you will. Foxboro has a “Polyanna” feel to it, not unlike a Mormon “Land of Oz.”

But a dark cloud hangs over Foxboro, sometimes literally. On a recent Friday evening in late summer, Foxboro was having a neighborhood 5K run/walk for the hundreds of families that live in the area. Suddenly, it looked like the Wicked Witch of the West had arrived: thick black smoke and flames billowed from a well-known industrial neighbor right next to the subdivision. Children became frightened. Some of them screamed that they couldn’t breathe and ran into other people’s houses to get away from the smoke. Parents panicked. Chaos descended on the race participants. A local resident took this video near the end of the episode.

Watching the video, one really expects to hear the Wicked Witch cackle, “I’ll get you and your little dog, too.”

Within the next half hour, I started getting e-mails from people from as far away as 40 miles complaining about the smoke and a distinct chemical smell, different from the occasional wind-whipped sulfur odor that sweeps in from the west, where the Great Salt Lake lies. In about 20 minutes, the smoke was gone, but the chemical smell lingered much longer. The next day, I got more e-mails from people who were experiencing a variety of respiratory symptoms and wondered what they had been exposed to.

The “Wicked Witch of the West” event was just the latest of many similar episodes involving Foxboro’s nonfictional villain – Stericycle, the medical waste incinerator. Stericycle’s North Salt Lake incinerator, however, is emblematic of a much larger issue: Via the front door, hospitals and clinics are purveyors of healing, well-being and saving lives. But out the back door, they often spread toxins and disease through a waste stream that is conveniently, but dangerously, burned into ashes by incinerators like Stericycle.

The story of North Salt Lake’s Stericycle facility is typical of what has happened in many communities throughout the country. The facility has been controversial for at least two decades. Even back when it was first permitted, there was concern about the health consequences of its emissions. The permit was approved by the Utah Air Quality Board by a one-vote margin. Legislation at the time prohibited such facilities from being within one mile of residences.

Around 2003, the county Planning and Zoning Commission received a proposal from the Foxboro developer to subdivide the land north and east of Stericycle into a large residential community. Part of the commission’s decision to grant Foxboro approval was based on discussions with the Division of Air Quality and the Division of Solid and Hazardous Waste. Both divisions were not forthright with information to the commission. They apparently claimed there were no “upset conditions.” Foxboro’s proposal was approved, and homes were built literally up against the wall of the incineration property, resulting in families living just feet from the incinerator smokestack, with some families literally sharing a backyard fence with Stericycle. This satellite photo showing the black soot on Stericycle’s roof and its close proximity to homes provokes the gnawing realization of what these families are breathing in 24/7.

Stericycle operates six incinerators in the US and is the largest medical waste treatment and disposal company in the country. Waste incinerators are serious public health hazards. Large studies have shown higher rates of adult and childhood cancers and birth defects among people who live around incinerators. Those results are consistent with the associations being causative. For example, a study of 14 million people followed for 13 years revealed an increase in cancer deaths of 11,000 people among those that lived within 7.5 kilometers of an incinerator.1,2 The cancer risk doubled for children living within 5 kilometers of an incinerator.3

This body of medical research is sufficiently robust to have precipitated a nationwide citizen movement to have these facilities closed. In fact, during the past 15 years, 98 percent of the 2,373 medical waste incinerators have closed; only 33 remain in operation. While thousands of communities have become cleaner as a result, in Utah things have gotten worse. Stericycle now accepts waste from eight surrounding states to be incinerated at its North Salt Lake plant. The city is serving as the sacrificial lamb for most of the western United States. In addition to medical waste, including human fluids and tissue, Stericycle is allowed to incinerate animal carcasses (more about that below).

As with most incinerators, the health consequences are not so much the high-volume pollutants, like particulate matter, ozone, NOx or SO2, but the amount of the hazardous air pollutants (HAPs) that are designated as such by the EPA because of their high level of toxicity, even at minute concentrations. HAPs include benzene, dioxins, furans, heavy metals, polycyclic aromatic hydrocarbons and even radioactive elements. Stericycle officially emits a similar volume of HAPs as a full-scale oil refinery or coal-fired power plant. But the emissions are released from a much shorter stack; therefore local deposition is greater. Stericycle’s permit allows it to emit 130 pounds of lead per year, 912 pounds of chlorine, 18 pounds of cadmium and 60 pounds of mercury. The total amount of HAPs allowed in its permit is 9.51 tons per year.

Most toxic heavy metals are not combustible, do not degrade, cannot be destroyed, accumulate in the local environment after leaving Stericycle’s smokestack, and accumulate in the bodies of everyone for miles around. They have been implicated in a range of emotional and behavioral problems in children – including autism, dyslexia, ADHD, learning difficulties and delinquency – and in adults – dementia, depression and Parkinson’s disease. Increased rates of autism and learning disabilities have been found around sites that release mercury into the environment, like coal power plants and incinerators.4 Utah has the highest rates of autism in the nation, double the national average. That fact alone should compel our state leaders to deal with every possible contributor to this public health disaster. Sources of heavy metal pollution should be first on that list.

A study by The National Research Council, an arm of the National Academy of Sciences, concluded that it was not only the health of workers and local populations that are affected by incinerators. It stated that, “Persistent air pollutants, such as dioxins, furans and mercury can be dispersed over large regions – well beyond local areas and even the countries from which the sources emanate,”5 meaning that Stericycle is far from an issue affecting its immediate neighbors only.

Incinerators do not eliminate hazardous substances; they concentrate them, redistribute them, and even create new ones, such as dioxins. In addition to dioxins, they emit chlorine, mercury, arsenic, lead, cadmium, ammonia and benzene – spreading miles from the smokestack, eventually inhaled by local residents or swallowed when they eat vegetables from their gardens, or their children play on a backyard swing set. Dioxins are likely the most toxic manmade substance known after plutonium. Many of these chemicals are both toxic and bio-accumulative, building up over time in the body insidiously with the risk of chronic effects from even very low, continuous exposure.

For multiple physiologic and biologic reasons, children and fetuses are at significantly increased risks from many of these incinerator emissions. One example is illustrative of the point. Many of these HAPs concentrate in human fetuses or in human breast milk. A nursing infant may consume 10 to 50 times as much dioxin as the average adult and is much more vulnerable to its toxicity. Six months of breast feeding will transfer 20% of a mother’s lifetime accumulation of organochlorines (like dioxins) to her nursing child.6 No risk assessment about Stericycle has paid any attention to whether or not their dioxin emissions are causing human breast milk of Utah’s mothers to be unsafe.

The combined impact of extensive geographic spread of incinerator emissions and bioaccumulation is starkly revealed by what has been discovered in the Inuit Native Americans in the polar region of Northern Canada. Inuit mothers here have twice the level of dioxins in their breast milk as Canadians living in the South. There is no source of dioxin within 300 miles. A study tracking emissions from 44,000 sources of dioxin in North America, combining data on toxic releases and meteorological records revealed the leading contributors were three municipal incinerators in the USA.7,8

Medical waste incinerators are even more hazardous than other incinerators for two reasons. Radioactive elements like potassium-40, uranium, thorium, cesium and strontium are ubiquitous in low concentration in human bodies and animal carcasses, and when tons of carcasses and body parts are incinerated, all those radioactive elements are concentrated and released up the smokestack.

Just as disturbing is the fact that prions, the highly infective mutated proteins that cause Transmissible Spongiform Encephalopathies (TSEs), i.e. Mad Cow disease in cattle, scrapie in sheep, chronic wasting disease in deer and elk and Creutzfeld-Jacob Disease (CJD) in humans – all uniformly fatal – are almost undoubtedly present in Stericyle’s waste stream. Prions are so infective that pathologists do not want to touch tissue from a suspected victim, be it human or animal. So the diagnosis is usually never made. And most of the time, there is no way that Stericycle would even know whether prions are in the waste stream headed for the smokestack then distributed throughout North Salt Lake. Prions are frighteningly resistant to destruction, including incineration. I’ll have a more detailed depiction of the issue of prions in a subsequent essay. A detailed report on the health consequences of waste incinerators is available online.

Any incinerator would represent a serious risk to public health in our community. As dramatic and intuitively dangerous as the video seems, it better serves a larger point. Any incinerator has start-ups and shutdowns and other “events” that result in the bypass of pollution-control equipment on a regular basis. In fact “pollution events” this severe may not represent a permit violation – which shows how out of control this situation has become.

Studies at other incinerators show that “bypass events” may be occurring 10 percent of the time. Dioxins produced during start-ups can be twice the annual dioxin emissions under steady state conditions. Spot monitoring, as is done by the Utah Division of Air Quality (DAQ), has been shown to be grossly inadequate and likely underestimates the actual dioxin and heavy metal emissions by 30-50 times. The best managed incinerator would still be a community health hazard.

This facility is anything but “best managed.” In layman’s terms, the DAQ has caught Stericycle falsifying its records, intentionally loading the incinerator with material that does not represent its normal feedstock in order to pass their emissions test – in other words cheating. And the DAQ has found Stericycle emitting hundreds of times more dioxins and furans than Stericycle’s permit allows (public health protection would demand that the company not be allowed to emit any). We were told by the DAQ that this facility is now under criminal investigation at the state and federal level.

An internal DAQ email quotes a subcontractor for Stericycle stating that the company is pressuring its manager to “push the limits of the plant.” Further, the comment is made that the manager recently received a huge raise and promotion and “that as a result, they are now demanding more and more of him.” The manager is complaining that “he is under a lot of pressure from his managers to feed more and more waste through the plant and that the plant can’t handle what they want it to do.” “Bypass events” like the one captured on video are all too predictable from a corporation that prioritizes profit over safety.

Hospitals and clinics are not innocent bystanders. As health care centers, it is ironic and indefensible for them to dispose of their waste in a manner that harms community health. The International Red Cross states, “Hospitals are responsible for the waste they produce. They must ensure that the handling, treatment and disposal of that waste will not have harmful consequences for public health or the environment.”

Neither is the EPA an innocent bystander. An appeal of Stericycle’s permit has been sitting on its desk since 2009. As a result of multiple recent community protests of Stericycle’s operations, the EPA has finally consented to address the appeal by mid-October 2013.

Incineration of medical waste is a business that simply shouldn’t exist. No useful product is produced; no needed service is performed. There are safer technologies, like steam autoclaving and burial. Several countries have committed to eliminating incineration as a destination for medical waste. The United States is not one of them. In fact the list of “enlightened” countries is not what you might expect – Ireland, Slovenia, Portugal and the Philippines.

Although many American communities are breathing cleaner air because of widespread closure of incinerators, North Salt Lake, and Foxboro residents in particular, are needlessly “taking a hit” for the team. Normally Mormon suburbs are bastions of political and cultural conservatism, reservoirs of quiet capitulation and obedience to authority. But in Foxboro, with town hall meetings, protest marches and rallies in the Capitol in front of the governor’s office, they are mounting an unwillingness to remain victims of Stericycle’s profiteering. They even convinced Erin Brockovich to come to Foxboro and lend her fame and legal muscle to the battle.

Foxboro has learned the wisdom of 19th century abolitionist Frederick Douglass. “Find out just what any people will quietly submit to and you have the exact measure of the injustice and wrong which will be imposed on them.” The residents of Foxboro are no longer quietly submitting to the mistake that is Stericycle, and they are exposing the nationwide scandal that is medical waste incineration.

Information from: http://www.truth-out.org/news/item/19069-hypocritical-smoke-the-scandal-of-medical-waste-incineration

U.S. needs to rethink Ebola infection controls, says CDC chief

A member of the CG Environmental HazMat team disinfects the entrance to the residence of a health worker at the Texas Health Presbyterian Hospital who has contracted Ebola in Dallas
Medical experts need to rethink how highly infectious diseases are handled in the United States, a U.S. health official said on Monday, after a Dallas nurse contracted Ebola despite wearing protective gear while caring for a dying Liberian patient.

As an outbreak of the deadly virus spread beyond West Africa, hospitals and nursing associations across the United States were taking a closer look at how prepared they were to handle such infections.

“We have to rethink the way we address Ebola infection control. Even a single infection is unacceptable,” Dr. Thomas Frieden, director of the U.S. Centers for Disease Control and Prevention, told reporters. “The care of Ebola is hard. We’re working to make it safer and easier.”

Frieden said health authorities are still investigating how the nurse became infected while caring for Thomas Eric Duncan in an isolation ward at Texas Health Presbyterian Hospital.

Duncan died last week and the nurse is the first person to contract the virus on U.S. soil, taking concerns about containing its spread to new heights.

The infected nurse is Nina Pham, 26, according to a Sunday school teacher at the church where her family worships and through a public records check of her address. Attempts to reach her family were not immediately successful.

The family was in shock when it learned the young woman had contracted Ebola, said Tom Ha, a close friend of the Pham family who is also a Bible studies teacher at the Our Lady of Fatima Catholic Church in Fort Worth.

“The mother was crying, very upset,” he told Reuters.

The Dallas nurse is “clinically stable,” Frieden said, and the CDC is monitoring others involved in Duncan’s care in case they show symptoms of the virus.

Frieden also apologized for remarks on Sunday, when the nurse’s infection was first disclosed, that suggested she was responsible for a breach in protocols that exposed her to the virus. Some healthcare experts said the comments failed to address deep gaps in training hospital staff to deal with Ebola. [ID:nL2N0S8014]

“I’m sorry if that was the impression given,” Frieden said. He said the agency would take steps to increase the awareness of Ebola at the nation’s hospitals and training for staff.

The Texas Nurses Association defended Pham in a statement, saying it was wrong to assume the nurse was to blame.

“The facts are not known about how the nurse in Dallas was exposed,” the association stated. “It is incorrect to assume that the nurse failed to follow protocols.”

At his news conference, Frieden said some changes in procedures had already been put into effect, including having staff monitor those putting on and taking off protective gear, and retraining staff on how to do so safely.

He said other steps were being considered including new types of protective clothing and possibly spraying down staff with solutions that could kill the virus if someone were to become contaminated.

Dr. Anthony Fauci, director of the National Institute of Allergy and Infectious Diseases, said in an interview with ABC that officials should consider sending Ebola patients only to a few “containment” hospitals.

President Barack Obama was briefed by Frieden and senior members of the administration about the second Dallas case and stressed that “lessons learned” from the CDC’s investigation should be shared with hospitals and healthcare workers across the country, the White House said.

Obama also spoke separately with U.N. Secretary General Ban Ki-Moon and with French President Francois Hollande about international efforts to contain the outbreak and to provide treatment centers in affected African nations.

A brief scare at Boston’s Logan International Airport caused emergency crews in protective gear to remove five passengers with flu-like symptoms from Emirates flight 237 from Dubai, but the CDC later said there was no Ebola threat.

EBOLA WASTE A CONCERN

Meanwhile, Louisiana’s top law enforcement official said he was granted a temporary restraining order to prevent the personal items of Duncan, who died on Wednesday, from being buried in a local landfill after being incinerated.

Louisiana Attorney General Buddy Caldwell said material collected from Duncan and the Dallas apartment where he was staying was taken to Port Arthur, Texas, on Friday to be incinerated. From there the incinerated material was to have gone to a hazardous waste landfill in Louisiana.

“There are too many unknowns at this point, and it is absurd to transport potentially hazardous Ebola waste across state lines,” Caldwell said in a statement after the restraining order was granted.

According to CDC guidelines, the Ebola virus does not survive on materials that have been incinerated.

The current Ebola outbreak is the worst on record and has killed more than 4,000 people, mostly in West Africa’s Liberia, Sierra Leone and Guinea. Duncan, a Liberian, was exposed to Ebola in his home country and developed the disease while visiting the United States.

Ebola, which can cause fever, vomiting and diarrhea, spreads through contact with bodily fluids such as blood or saliva.

The infection of the Dallas nurse is the second known to have occurred outside West Africa since the outbreak that began in March. It follows that of a nurse’s aide in Spain who helped treat a missionary from Sierra Leone, who died of the virus.

Officials said Pham’s pet dog, a 1-year-old King Charles Spaniel, would be kept safe while its owner was in the hospital. That contrasts with the dog of the health worker in Spain that was euthanized out of fear the animal could spread the disease, prompting protests from animal rights activists.

(Additional reporting by Julie Steenhuysen in Chicago, Jonathan Kaminsky in New Orleans, Marice Richter in Dallas and Roberta Rampton in Washington; Writing by Jon Herskovitz and Ken Wills; Editing by Michele Gershberg and Lisa Shumaker; Editing by Andrew Hay and Tom Brown)

FILED UNDER:

U.S.

Health

chinese incinerator manufacturers

In a simple design with a metal steel drum electric. including:
A cage for receipt of biomedical waste;
A combustion chamber with fireplace with a filter to retain ashes;
A cover;
An air supply;
A turbine  allowing the supply of the air.
Combustion temperature: 1800 ° C. Compliance with European standards.
Comes with all necessary accessories
Supply of incinerator model PDR-18 with:

·        Capacity 100 kg/hr of waste containing up to 85% moisture

?      Two combustion chambers

·        Two fully automatic, oil fired, pressure jet burners

·        Panel board

·         Diesel tank of capacity 250 It. with 2 diesel pipelines, filter and valve.
Type: for animals waste
Capacity: 30 kg per hours for a maximum load of 120 kg.
GLP Gas
Voltage: 110V-120V
Semiautomatic control board
Stainless steel chimney, 3.5 meters above the incinerator.
High temperature painting for all the incinerator.
Front door for loading and unloading.
Fuel    Diesel Oil 8/ kerosene
Capacity (m3)    0.57
Ave Capacity    50 kg per hour
Ave time for Burnout     5 hrs
External Dimensions
Length    2000mm
Width    1100mm
Height including flue    3500mm
Door opening
Internal Dimensions
(primary chamber)
Length    1200mm
Width    620mm
Height     660mm
Operation
Min. operating temperature    9500C
Max. operating temperature    13200C
Residency time in second chamber    2.0 seconds
Weight    1850kgs
Ancillaries
Operating and maintenance manuals
Recommended Spare list
300 liter fuel tank
Plant burning rate – 100kg/hr

Fuel – Diesel oil   – 35 sec Redwood

Overall dimensions are as follows:

Width    2261mm

Length  3264mm

Chimney Diameter  –  390mm

Chimney Height      –  8000mm
chinese incinerator manufacturers, We process 8-10 ton waste of sheep carcass and its byproduct per day. We are looking for the equipment: combustion burners(combined fuel supply:natural gas and diesel),control panel and filter system. The diameter of the incinerator is 20 cm. Lower calorific power of the waste is 4KW/KG. Heating power 4000KW

Incinerator Maximizing Combustion Efficiency

More smoke and other pollutants are released into the air during the ‘start-up’ and ‘cool down’ phases of the burn cycle

than during the ‘full burn phase’ when high temperatures are maintained.    Low temperature smoldering fires should be

avoided. Burn only dry feedstock and periodically add additional waste to the fire in order to maintain high burn

temperatures until all waste has been destroyed. If waste is to be open burned on the ground, the use of deep or steep-walled

‘pits’ should be avoided as this will prevent the necessary turbulent mixing of oxygen with the burnable gases.

Desired operating temperature should be achieved as quickly as possible when operating any burning or incineration device.  A

rapid ‘start-up’ can be achieved by first loosely loading dry paper, paperboard packing and untreated wood into the bottom

of the device. Dry, loosely loaded material will ignite more quickly and burn more evenly than a wet, tightly packed load.

Wet waste should only be added after  the fire is actively burning.  Overfilling the burn chamber will prevent the turbulent

mixing of burnable gases and oxygen, and should be avoided.

Modern batch feed incinerators are designed with primary and auxiliary burners to achieve and maintain the necessary high

burn temperatures. Additional waste should only be added to these incinerators once the ‘cool down’ phase has been

completed and it is safe to do so.

incinerator manufacturers

1. SCOPE OF WORK The work specified in the contract will include.
1. Supply, install and commission an incinerator as provided in the technical specifications
2. Provision for adherence to OSHA and other statutory requirement relating to Health and Safety of workers during execution of the works covered in this tender.
3. Assessment and preparation and construction of a standard incinerator shed with one waste storage room ( see the design )

4. Provision of operation and maintenance manuals and drawings complete with maintenance schedule and instructions.

5. Fuel oil storage tank- Mild steel1500 liters capacity

6. Onsite training for operation and maintenance staff.

IMPORTANT
incinerator manufacturers To enable the Employer undertake conclusive evaluation of the tender, tenderers are requested to submit with their offers the detailed specifications, drawings and catalogues with commissioning and maintenance instructions for the Incinerator they intend to supply, install and commission. Tenderers who fail to comply with this requirement fully shall have their tenders rejected. 2. TECHNICAL SPECIFICATIONS OF THE REQUIRED INCINERATOR

2.1 General Description

The plant must have four distinct sections that demonstrate three principles of turbulence, residence time and temperature retention. The regulated sections may include but not limited to:
1. Overall plant layout
2. Feed chamber/charging
3. Primary combustion chamber
4. Particulate scrubbers
5. Acid gas scrubbers.
6. The stack/chimney.
7. Minimum capacity of primary chamber = 0.18 cubic metres
8. Burn rate (rate of waste incineration) = a least 20 kg per hour
9. Should have a full width counterbalance loading door allowing easy access to the main chamber for loading and removing ash.
Supply, Installation and Commissioning of An Incinerator in Eastern Hydros [ Page 28

2.2 Feeding and Charging
Controlled hygienic mechanical feeding that does not negatively influence the air temperature in the primary and secondary chambers of the incinerator shall be used.
2.3 Primary Combustion Chamber.

a) This chamber should be equipped with burners that use low sulphur fuel.
b) The chamber should ensure a minimum exit temperature of 850 degrees centigrade.

2.4 Secondary Combustion Chamber (After burner)

a) Should be fitted with burners that use low sulphur fuel.
b) Ensure secondary air supply is controlled.
c) Ensure residence time is not less than two seconds.
d) Ensure that the gas temperature as measured against the inside wall in the secondary chamber and not in the flame zone is not less than 1100 degrees centigrade.
e) Ensure the emitted oxygen content of the emitted gases is not less than 11%
f) Ensure both primary and secondary combustion temperatures are maintained until all waste is completely combusted.

2.5 Particulate Removers

A mechanical particulate collector must be incorporated after secondary combustion chamber for removal of particulate pollutants entrained in the flue gas stream. The particulate collectors may include any of the following or a combination thereof:
a) Cyclone separator
b) Electrostatic precipitators
c) Fabric filters
2.6 Chimney/Stack

l) The chimney should have a minimum height of 10 metres above ground level and clear the highest point of the building by not less than 3 metres for all roofs. The topography and height of adjacent buildings within 50 metres radius should be taken into account.
m) The chimney should be visible to the operator from the feeding area.
n) The minimum exit velocity should be 10 metres per second and at least twice the surrounding wind speed (Efflux velocity = wind speed x 2) whichever is higher to ensure no down washing of exiting gases.
o) The point for measurement of emissions shall be provided.

2.7 Instrumentation

a) Instrument for determining the inside wall temperature and not burner flame temperature must be provided for both primary and secondary chambers.
b) An audible and visible alarm must be installed to warn the operator when the secondary chamber temperature drops to below the required temperature.
c) A carbon monoxide and oxygen meter/recorder should be provided

d) A smoke density meter/recorder should be provided.
e) A solid particulate meter/recorder should be provided.
f) Any other instrument that may be considered necessary.

2.9 Emission Limits

a) Combustion efficiency (C.E) shall be at least 99.00% where C.E = %Carbon dioxide x 100 / [% Carbon dioxide + carbon monoxide]
b) The temperature of the primary chamber shall be 800 +/- 50 degrees centigrade
c) The secondary chamber gas residence time shall be at least 1 second at 1050 +/- 50 degrees centigrade with 3% oxygen in the stack gas.
d) Opacity of the smoke must not exceed 20% viewed from 50 metres with naked eyes.
e) All the emission to the air other than steam or water vapour must be odourless and free of mist, fume and droplets.
f) A 99.99% destruction and removal efficiency (DRE) for each principal organic hazardous constituent (POHC) in the waste feed where DRE [ ( Win – Wout) /Win ] x 100 where Win = mass feed rate of the POHC in the waste stream fed to incinerator and Wout = mass emission rate of POHC in the stack prior to the release to the atmosphere.
g) The average dioxin and furan concentration in the emission should not exceed 80mg/m3 total dioxins and furans if measured for a period of 6 to 16 hours.

– Manual technical monitoring is shipped with the hardware with all explanations of failures and resolutions
Capacity/island : 4000 kg/day ; 25000 kg/day ; 31000 kg/day ; 48000 kg/day

Burning temperature – over 12000C

Two chambers – minimum

Emissions – dioxin and heavy metaly – better then Kyoto protocol

Emission – monitoring system

Waste unloiding – directly from waste track to incinerator